Thanks: 7
Likes: 16
Hey, so do some of the features that I'm reading about with the MM3 like TPMS adjustment, fog lights on with high beams and speedo calibration only work if I get the tuner and tunes from a certain vendor or are they universal with all MM3's despite the vendor? I see DRD has these but I'm not a fan of only having 60 days of support and a higher price from the start so I was looking at Anarchy too.
That's a good question. Like just getting a blank mm3 to monitor and change those items with out tuning
Sorry if this is a dumb questions but what is the 60 day support stipulation? The MM3 updates are done on MM3's website so you can visit there whenever there is a new software update and it will update your monitor. The MM3 updates are not related to the engine or trans tuning of the truck.Originally Posted by bighog85
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
OP, I believe those features are built into the MM3 software and not the tuners tune. So if you a MM3 with the most up to date firmware you will have those features reguardless of who you buy the MM3 from or what tuner you use.
2018 2500, 6.7 Cummins, black, stock drive train, Carli 2.5 leveling kit, 18x9 Method Nv wheels, Cooper AT3 XLT, 68RFE, DRD delete tuning
I have an mm3 . How do I access and use those features?
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
You'll have to update it.
Join as a Lifetime Platinum Member Today
cumminsdieselfreak liked this post
I figured it probably had the newest update. I've only had it a year
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
Nope.
There have been a few updates over the last year.
cumminsdieselfreak thanked for this post
cumminsdieselfreak liked this post
I guess I'm behind then . Thanks
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
No problem friend.
Posting Permissions
Register To Reply
Bookmarks