Looking to see if anyone knows where I can find a plug/cap for the exit of the EGR cooler.
Thanks all!
Sent from my iPhone using Tapatalk
Looking to see if anyone knows where I can find a plug/cap for the exit of the EGR cooler.
Thanks all!
Sent from my iPhone using Tapatalk
17 CCLB Laramie
Stealth64/S480
68RFE
CTG tuned
I've heard of people putting freeze plugs in them and welding them up im not sure what size or where they got them from.
Sent from my SM-G975U using Tapatalk
Thanks for the reply. I believe it’s a Dorman freeze plug you’re talking about. I’m hoping to find a cap that can be installed with the oem v-band clamp.
Sent from my iPhone using Tapatalk
17 CCLB Laramie
Stealth64/S480
68RFE
CTG tuned
Oh okay i understand what your saying now. Worst case you can always make one which shouldnt be too bad at all just use a grinder to make the circle and the edge to fit into the V-band
Sent from my SM-G975U using Tapatalk
Not a bad idea.
I’ll keep that in mind, thanks.
Sent from my iPhone using Tapatalk
17 CCLB Laramie
Stealth64/S480
68RFE
CTG tuned
I believe people are making them.
They are just a piece of steel cut to fit. You could buy the same size v-clamp kit that includes both ends for the pipe but you would still be welding up the pipe and it would probably cost a lot more.
2013 2500 6.7 cummins crew cab. white and stock as can be.
If it were not for bad luck I would have no luck at all.
using Tapatalk
I cut mine out of a piece of flat stock and ground it round.
Worked great.
20191208_090022.jpg
Awesome! Do you remember the diameter and thickness you used by chance?
Sent from my iPhone using Tapatalk
17 CCLB Laramie
Stealth64/S480
68RFE
CTG tuned
I think it was 1/8" stock... just something I had laying around in the shop. I marked it using the crossover tube flange with a marker and then ground my mark off.
Thank you
Sent from my iPhone using Tapatalk
17 CCLB Laramie
Stealth64/S480
68RFE
CTG tuned
Bookmarks