Do you have any recommendations with regard to who you would recommend?
Thanks: 3
Likes: 8
Do you have any recommendations with regard to who you would recommend?
walla2k5 liked this post
I deal with Revmax quite a bit.Originally Posted by SmokinElectro
Ray
Double R Diesel, LLC
www.doublerdiesel.com
info@doublerdiesel.com
The Cummins Whisperer!John 3:16, Romans 10:9-10...Tuning for the Heart and Soul.
walla2k5 liked this post
Perfect! Thank you. It happened in my driveway, not out of state! Thankfully!
I know this is an older thread but @SmokinElectro how did you make out. I’m having the same issue right now and will be doing the RevMax VB/solenoid/filter thread adapter shortly. From what I’ve seen, the solenoid failures are a manufacturing issue. My truck is also a 2016, 41k miles, deleted & tuned by @Double R Diesel who graciously sent me a RevMax compatible tune within 30 minutes of my asking
walla2k5 liked this post
I got the parts from revmax, they were very helpful. I had the parts installed at a local transmission shop for around $300. Ray did me a transtune. Truthfully, I really don't feel any difference in the trans, but no more trouble code.
Just got it all done, took around 4 hours. I was nervous so I was checking everything multiple times before doing. Just waiting for the gasket to cure (packaging says 24 hours) so I can fill up and try it out. Really hope there’s no surprises in store...
The shop that I used put a gasket back on it, not the silicone. It leaks a very little. Dealing with it for now, let me know how yours works out.
As far as tuning...think I should just run my current tune until I confirm everything works? I’d hate to load the new tune only to have a hardware issue @Double R Diesel
Sure that will be fine.
Ray
Owner and Calibration Specialist
Double R Diesel
www.doublerdiesel.com
info@doublerdiesel.com
The Cummins Whisperer!
Jake94134 thanked for this post
Posting Permissions
Register To Reply
Bookmarks