I’ve done some searching and haven’t been able to find a definite answer.

I’ve gotten a chance to buy a 2011 RAM 5500 C&C 4x4 truck for a good deal.

The problem is it has a miss, and from my understanding of cab and chassis trucks, it is probably a dropped valve/seat.

I have not heard it run to see what may be wrong, So let’s assume the engine is trashed.

I have a 2007 2wd 6.7L Cummins truck for around the farm that runs excellent, but the frame and body are in much less than desirable conditions (major rust).

Is there any way I can swap this engine into the C&C truck?

Can the engine with ecm be switched in and function with the rest of the truck?

Maybe some tuning changes?

I’m confident from my research that the injectors are different between the two, so a motor swap with the 2011 ECM isn’t possible.

The emissions from the 2007 are removed, so that’s not a concern, but I would also probably need a new tune as it was deleted with a Smarty.

Any advice you experts have out there would be great.

Thanks!


Sent from my iPhone using Tapatalk