I G56 swapped my 2014 RAM 2500 6.7 Laramie with a push-button start (68RFE) over a year ago, and I have had a switch to jump the starter relay, and I would like it to function as properly.
I tried cutting the TRS T41 (YL/DB) pin 15 on the RF and grounding it with no luck.
I have also tried cutting and grounding pin 7 T141 (YL/OR) from the RF hub and grounding it with no luck.
I have a manual tune, and I swapped the transmission harness out to a manual one.
Even when I had the auto harness, I believe I grounded pin 4 with no dice.
Although I did not have all data, it's a 50/50 shot.
If anyone has any advice or knowledge on this subject, please help me out.
I have done countless hours of research with no luck.
If you got any questions, ask away.
Thank you!
Bookmarks