Yeah it's pretty simple. The back door inner handle takes a couple torx screws and it will pull out of the door. then you can see the rods and the cable without taking the panel off. Pull the cable. its like a brake cable on a bike. That is what opened mine. Then I got my fingers under the plastic of the inner door and gave a quick tug and they all started to pop off. Be carefull though there may be a couple screws in the little black pocket under the window. Take those out. pop all the way around the outside and it will pop right off. I pulled all the tabs out of the door and slid them back into the panel so reinstall would be easier. Putting it back on is just as simple. Line up the holes with the clips and smack the panel. It should pop in the holes. If you can't get it off let me know and I'll take some pics for ya