2017 Ram 6.7 Cummins - EGT Probe Install

[jholen]

Greetings!

Took the passenger wheel well off for easier access to exhaust manifold.

Any input on where exactly to drill/tap?

Picture below:

20200623_085521.jpg

 0 Comment(s)

[TexNeck]

I would try and get it right on where the collection area enters the turbo. This is the most accurate place IMO. If you need a flatter spot then I would error toward the left in your pic/back nearer cylinder 6

 0 Comment(s)

[jholen]

I would try and get it right on where the collection area enters the turbo. This is the most accurate place IMO. If you need a flatter spot then I would error toward the left in your pic/back nearer cylinder 6

Awesome!

Thanks.

Gonna jack it up and pull the wheel off for some more working room.

 0 Comment(s)

[jholen]

20200623_142454.jpg

20200623_142502.jpg

20200623_145550.jpg

 0 Comment(s)

[TexNeck]

Well done!!

 0 Comment(s)

[cumminsdieselfreak]

I would try and get it right on where the collection area enters the turbo. This is the most accurate place IMO. If you need a flatter spot then I would error toward the left in your pic/back nearer cylinder 6

20200623_142454.jpg

20200623_142502.jpg

20200623_145550.jpg

Excellent!

 0 Comment(s)

[danielsol10]

If I leave the EGR and cooler on for now do I need the probe?

 0 Comment(s)

[watersupply189]

If I leave the EGR and cooler on for now do I need the probe?

No, you don’t need a probe unless you want to monitor your EGT’s.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[AK Bob]

Nice install, great to see you used all the right tools and took all the proper precautions.

Good example on how to do the job right!


2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.

Sent from my iPhone using Tapatalk

 0 Comment(s)

[jholen]

Thanks gents! Went very slow and replaced grease each time.

 0 Comment(s)