MM3 Owners Manual

[AK Bob]

After reading some of the posts over the last few months it seems there are quite a few MM3 owners that are not aware of all the features and capabilities of the unit. Thankfully Ray @DRD has provided some excellent information and U-tube Videos on the use of the MM3, instillation, updating, troubleshooting and special features of the unit. I found the attached compressive users guide for the Smarty Touch. Smarty-Touch-Comprehensive-Guidebackup.pdf This guide has some very useful owners information and the menu options are similar, but I am wondering if @MM3 Power has an updated version specifically for the current MM3 unit. If anyone has found a better more current user guide please post below.


2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. MM3 tuned by Double R Diesel. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.

Sent from my iPad using Tapatalk

 2 Comment(s)

Jonathan Simons Why does it say I don't have permission to view the document?

07-19-2020

Svhardy Thats for sure I would have been lost without them!

08-20-2019

[Tiger6.7]

This is closer to MM3.

https://rudysdiesel.com/files/v2/instructions/RaceME-Ultra.pdf

Unfortunately MM3 hasnt released any guidance.

The RaceMe Ultra appears to be the the same as MM3 with the difference being that the Ultra is preloaded with tuning software.

 0 Comment(s)

[RamIt]

This is closer to MM3.

https://rudysdiesel.com/files/v2/instructions/RaceME-Ultra.pdf

Unfortunately MM3 hasnt released any guidance.

The RaceMe Ultra appears to be the the same as MM3 with the difference being that the Ultra is preloaded with tuning software.

They are similar but not the same. The module is the same but MM3s firmware differs greatly from that of the Ultra.

There are menus and “buttons” on the Ultra that will be different from the MM3

 0 Comment(s)

[AK Bob]

This is closer to MM3.

https://rudysdiesel.com/files/v2/instructions/RaceME-Ultra.pdf

Unfortunately MM3 hasnt released any guidance.

The RaceMe Ultra appears to be the the same as MM3 with the difference being that the Ultra is preloaded with tuning software.

Thanks, more good information but mainly covers installing tunes.

We really need a good compressive user manual that describes each menu function like how to use the Dash Log and HS Log.

What is the Service Codes under Config Tools used for? @MM3 Power do you have any plans to release a user guide for this unit?


2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. MM3 tuned by Double R Diesel. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.

Sent from my iPad using Tapatalk

 0 Comment(s)

[Mjhockey155]

Thanks, more good information but mainly covers installing tunes.

We really need a good compressive user manual that describes each menu function like how to use the Dash Log and HS Log.

What is the Service Codes under Config Tools used for? @MM3 Power do you have any plans to release a user guide for this unit?


2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. MM3 tuned by Double R Diesel. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.

Sent from my iPad using Tapatalk

I have the same two questions.

How do I use the dash log and hs log?

And what are the service codes for?

 0 Comment(s)

[AK Bob]

I have the same two questions.

How do I use the dash log and hs log?

And what are the service codes for?

The Service Code question was answered here.

MM3 Service Codes?

https://r.tapatalk.com/shareLink/top...ink_source=app


2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.

Sent from my iPhone using Tapatalk

 0 Comment(s)

[AK Bob]

I have the same two questions.

How do I use the dash log and hs log?

And what are the service codes for?

On the Dash Log, first configure a gauge layout with the items you wish to monitor.

Run or drive your truck to create the conditions you want to log.

Touch the Dash Log button to start logging data.

The red LED will illuminate on MM3 while you are logging.

When finished logging touch Dash Log button to stop recording and your data will be saved on the SD card.

To read and plot the data I import the data file from the SD card into Microsoft Excel.

Attached as an example is a plot of VGT actual vs VGT desired.




2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.

Sent from my iPad using Tapatalk

 0 Comment(s)

[MM3 Power]

@AK Bob

We are working on a comprehensive users manual currently.

We will also be making a series of videos explaining PID configuration, getting started, data logging, etc...

Ray @DRD and a few other tuners have already made several great videos that are currently available on YouTube.

Thanks for the support and the recommendations to make the product better!

 0 Comment(s)

[AK Bob]

@MM3 Power thanks for the fast response. I am very excited to hear this news.

MM3 is a great product and an updated comprehensive user guide will allow us all to understand and utilize all the many features.

Thank you so much for your help and support.


2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. MM3 tuned by Double R Diesel. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.

Sent from my iPhone using Tapatalk

 0 Comment(s)

[Tiger6.7]

Is there a release date for the guide?

MM3 power has been great to deal with regarding Warp tuning questions.

 0 Comment(s)