So I just installed a FLO~PRO 5” turbo back system this weekend.

I’d like to pass along some lessons learned.

1. Jack up your tranny and drop the crossmember. It’s not hard at all and makes things MUCH easier.

2. The v band clamp on the turbo is going to be tight as hell. I probably wasted 30 mins poking at it with a screwdriver.

If you touch each side with an air chisel, it pops right off. Literally a second a side!

3. Loose fit everything first. You need to be able to manipulate connections to make it fit right!

hope that saves someone else a bit of frustration!