What Did You Do On Your Truck Today?

**IGOTACUMMINS** · 06-19-2015

Originally Posted by K-Sons

Gave The Ghost some new caterpillar batterys and a oil change
Just about for got how I like driving the old truck

We thought the trans was shot.

0 Comment(s)

**K-Sons** · 06-19-2015

It is on its way out so driver it till it stops LOL

0 Comment(s)

**IGOTACUMMINS** · 06-19-2015

Oh boy!

0 Comment(s)

**F350Cummins** · 06-19-2015

Most of us are a little far away to drag your truck home.

Rear brakes last weekend (forgot to post)

0 Comment(s)

**K-Sons** · 06-19-2015

LOL

0 Comment(s)

**thrashingcows** · 06-19-2015

Today I gave Patches a good cleaning...inside and out. Noticed my E-brake pedal assembly had come loose AGAIN! This is the third time in just over a year. This time it got lock nuts and washers instead of the OEM hardware. And I greased the drive train as well.

Then pulled the skid plate off because it was rattling every time I hit a decent size bump. It was the center part that rests against the tranny cross member. It was worn through the paint to make shiny metal. I cleaned everything and then added some Neoprene/foam gasket material. Should quiet it up for a while.

I also swapped out my 93 LE tailgate since the latches were starting to fail and only the RH side was actually grabbing...barely. I swapped for one of my earlier tailgates. The center brushed aluminum trim panel was missing the "Dodge Ram" emblem, so there were 3 holes visible.

So I dug through my box of misc ram emblems and made this up. I had a set of "Ram 150" emblems, so I cut off the 150. And the "Cummins Turbo Diesel" was cut off a junk set of "Power Ram 250/cummins turbo diesel" emblems. A little black paint along the edges where they were trimmed, and some 3M trim tape and voila!

0 Comment(s)