So I put new tires on the truck yesterday... they are slightly larger than the last set, so I changed the tire size in the mm3... now I have the CEL which I can clear, and also P0501 which comes right back up when I clear it... any suggestions?
So I put new tires on the truck yesterday... they are slightly larger than the last set, so I changed the tire size in the mm3... now I have the CEL which I can clear, and also P0501 which comes right back up when I clear it... any suggestions?
I also have code u1412 implausible vehicle speed signal received...
Have you reverted back to last tire size without issue and ran it to see If code still persists?
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Did you enter like 35.45 or something similar? If so, just enter 35 etc and see if it fixes it.
2018 Ram 2500 4x4 G56
Romans 10:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
joe@ddpmotorsports.com
www.ddpmotorsports.com
So I figured it out... when I had the issue.
I had entered 35 inches... that’s when all of the codes came up.
To fix it I went back and entered 35.00 and then cleared the codes and no more issues.
Glad to hear it- thanks for update.
Hopefully that will help someone in the future!
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Bookmarks