I am not sure what the problem may be but my MM3 tuner with Rays Warp tuning will not turn on and the LED light on the Right side is blinking Red and Green. The truck starts up and runs fine but what can I do to fix this.
Thanks,
Todd
I am not sure what the problem may be but my MM3 tuner with Rays Warp tuning will not turn on and the LED light on the Right side is blinking Red and Green. The truck starts up and runs fine but what can I do to fix this.
Thanks,
Todd
Try unplugging the tuner at the OBD port and reconnecting it. If that doesn't work, make a copy of all your SD card contents and save that somewhere on your computer, then reformat the SD card in FAT 32 format, then finally paste all the saved files of the SD card back on the reformatted card...then do the unplug and plug in thing again.
Ray
Double R Diesel, LLC
www.doublerdiesel.com
info@doublerdiesel.com
Thanks Ray!
Hey Ray Unplugged and plugged in the OBDII port and it worked just fine. I also took the time to save my stock file to my computer. Is there anything from that file that would further tune my truck better since I bought the tuner prior to the time that you needed to send in the stock file? Or am I good.
Thanks again! Especially for answering me on an Easter Sunday!! He is Risen!!
You are good to go. Glad that fixed it.
Ray
Double R Diesel, LLC
www.doublerdiesel.com
info@doublerdiesel.com
Once again Ray is the answer man
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Bookmarks