Thanks: 2
Likes: 16
Well I finally got my new motor done and ready to drop into my truck to replace my horribly leaky 53 block. It's my daily and only vehicle and I'd like to know if anyone out there can give me an estimated time that it'd take to pull one, throw some (not many they're all small things) parts to the new motor and drop it back in. For reference it's an 01 24v. Anything is appreciated as always. Thanks!
Sent from my XT1650 using Tapatalk
david3gen liked this post
Subscribe ...
I haven't done this on a diesel, only on a gass. I depends on how many helping and parts needed while doing it. On a gasser by myself .. took 1 1/2 days. Needed to go for parts twice and almost no sleep.
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
david3gen liked this post
If you and a couple buddies are knowledgable it can be done in a weekend. If you by chance haven't done this before and are taking your time it can very well take a few days. As long as you don't rush it it won't be too bad at all. Especially if take your time and do a print out of others step by step process. Might have to throw some of them together but hey it works LOL!
Matthew 6:9-13, 2 Corinthians 5:20
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email us at:
sales@ddpmotorsports.com
www.ddpmotorsports.com
Get everything laid out. All the proper equipment and tools you need or think you'll need
By yourself or with a little help you'll probably have about 15-20 hours in it
You are going to have to have plenty of tools both standard and metric wrenches and sockets and air tools will help the processOriginally Posted by 9mgcb81
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
How much time is a bit difficult to estimate. I did it once on my first truck. But it was a gasser.only help i got was lifting the hood offriends often disappear when you need help. I used about 5 days alone
Sent from my iPhone using Tapatalk
2006 dodge ram 2500 laramie crew cab 5.9 cummins. 10x20 et-24 fuel offroad with 275.60r20 tires. bully dog gt tuner. 48re ATS built tranny triple disc converter ATS oilpan and transgo quick shifter. 4" turbo back exhaust. brembo discs and pads
Yup about 2 days with a pair of skilled and semi skilled hands. No Beer, lots of Pepsi and coffee and someone to bring the snacks.
Anybody near Kansas that can give this guy a hand?
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
david3gen liked this post
Did you put the new engine in or the Bar b QHow much time is a bit difficult to estimate. I did it once on my first truck. But it was a gasser.only help i got was lifting the hood of
Sent from my iPhone using Tapatalk
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
david3gen liked this post
Bar b q. Just kidding. No i got it done. Was pretty frustraded because i had to do this alone. I had to take tons of pictures so i could put it together again. Fun to watch now. But this project is the reason why i can do most of the mechanical stuff on my truck today. I got alot more self confidence.Did you put the new engine in or the Bar b Q
Sent from my iPhone using Tapatalk
2006 dodge ram 2500 laramie crew cab 5.9 cummins. 10x20 et-24 fuel offroad with 275.60r20 tires. bully dog gt tuner. 48re ATS built tranny triple disc converter ATS oilpan and transgo quick shifter. 4" turbo back exhaust. brembo discs and pads
Power247 liked this post
Yeah friends are hard to count on unless they are real and true friends are hard to find and come by nice job budHow much time is a bit difficult to estimate. I did it once on my first truck. But it was a gasser.only help i got was lifting the hood of
Sent from my iPhone using Tapatalk
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Posting Permissions
Register To Reply
Bookmarks