Thanks Thanks:  25
Likes Likes:  87
Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: Blinding Longhorn chrome center console bezel

  1. Top Of Page | #1
    Basic Member Tjk's Avatar

    User Info Menu

    Blinding Longhorn chrome center console bezel

    Well I had about enough of the center console's chrome bezel blinding me everyday and decided to do something about it.......
    1st step was to remove the chrome bezel, it was very easy using a credit card- go around the outside of of the bezel and slide the card in, when slide the card back and forth you will feel the tab that secures it just press the card into the tabs and pull up on the bezel, you may need to make a couple rounds as there is about 9 of these tabs.
    2nd is to use some alcohol and clean the bezel very well.
    3rd Since its chrome I used a self etching primer (found at an auto parts store) to give the following coats of paint something to stick to a few thin coats is all that's needed.
    4th I used a colored primer (found at Walmart or home depot) to top coat the etching primer.
    5th is the color matching paint for the seats and trim I have (found Walmart) I also found a dead match to the light tan color but think the darker color looked better in this spot.
    6th the color match paint only came in satin and that was just a lil to shiny to match the interior so a coat of flat clear (Walmart) was dusted on top to bring it to a nice even flat finish.
    I'm absolutely thrilled with the results and it looks like factory. This method will work for other interior chrome, but the console bezel is the only thing that was blinding me constantly

    2015 Ram 3500 longhorn MC DRW. Deleted running raceme ultra


  2. Top Of Page | #2
    4kids2dogs&RV's Avatar

    User Info Menu

    Re: Blinding Longhorn chrome center console bezel

    Looks great, I know what you mean about it blinding you... I may have to look at doing this on mine.
    Thanks for sharing!


    2011 2500 Laramie CCSB 4x4, 6.7L Cummins, 68RFE

  3. Thanks Tjk thanked for this post
  4. Top Of Page | #3
    Basic Member Tjk's Avatar

    User Info Menu

    Re: Blinding Longhorn chrome center console bezel

    If you want the light tan color here are the ones that are a perfect match. I got the textured one thinking it would be cool but again I went with the darker color they did have a texture color that matched the carpet section in the floor mat but just didn't match anything in the console area so I didn't go that direction

    2015 Ram 3500 longhorn MC DRW. Deleted running raceme ultra


  5. Thanks watersupply189 thanked for this post
    Likes watersupply189, cumminsbadgirl liked this post
  6. Top Of Page | #4
    No Vacancy Power247's Avatar

    User Info Menu

    Re: Blinding Longhorn chrome center console bezel

    Nice work! That came out great

    Greg
    2012 | RAM 2500 | CCSB | Custom tuned by Double R Diesel
    2016 | Heartland Pioneer | DS310

    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI

  7. Thanks Tjk thanked for this post
  8. Top Of Page | #5
    theaaronbush's Avatar

    User Info Menu

    Re: Blinding Longhorn chrome center console bezel

    Quote Originally Posted by Tjk View Post
    Well I had about enough of the center console's chrome bezel blinding me everyday and decided to do something about it.......
    1st step was to remove the chrome bezel, it was very easy using a credit card- go around the outside of of the bezel and slide the card in, when slide the card back and forth you will feel the tab that secures it just press the card into the tabs and pull up on the bezel, you may need to make a couple rounds as there is about 9 of these tabs.
    2nd is to use some alcohol and clean the bezel very well.
    3rd Since its chrome I used a self etching primer (found at an auto parts store) to give the following coats of paint something to stick to a few thin coats is all that's needed.
    4th I used a colored primer (found at Walmart or home depot) to top coat the etching primer.
    5th is the color matching paint for the seats and trim I have (found Walmart) I also found a dead match to the light tan color but think the darker color looked better in this spot.
    6th the color match paint only came in satin and that was just a lil to shiny to match the interior so a coat of flat clear (Walmart) was dusted on top to bring it to a nice even flat finish.
    I'm absolutely thrilled with the results and it looks like factory. This method will work for other interior chrome, but the console bezel is the only thing that was blinding me constantly https://uploads.tapatalk-cdn.com/201...8d7454e108.jpghttps://uploads.tapatalk-cdn.com/201...7eae5b3370.jpghttps://uploads.tapatalk-cdn.com/201...49aca4db05.jpghttps://uploads.tapatalk-cdn.com/201...eb4d2e90e1.jpghttps://uploads.tapatalk-cdn.com/201...a04c7c8da8.jpghttps://uploads.tapatalk-cdn.com/201...a1e07a18b6.jpghttps://uploads.tapatalk-cdn.com/201...b01b6d7c99.jpg

    2015 Ram 3500 longhorn MC DRW. Deleted running raceme ultra
    I know exactly what you mean! I have to put my hat or a piece of paper over mine! I think I'm gonna paint mine too! Your's turned out great!


    2012 Ram 2500, 4x4, 3.73, 3" level, 35" tires, 4" FloPro TBE, EGR valve/cooler/throttle delete, S&B CAI, GDP heater delete, GDP S2 air horn, RaceME Ultra Warp Tuning


  9. Thanks Tjk thanked for this post
  10. Top Of Page | #6
    MOD watersupply189's Avatar

    User Info Menu

    Re: Blinding Longhorn chrome center console bezel

    That looks really good


    Sent from my iPhone using Tapatalk

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  11. Thanks Tjk thanked for this post
  12. Top Of Page | #7
    Basic Member Yamaha242LS's Avatar

    User Info Menu

    Re: Blinding Longhorn chrome center console bezel

    Love it. Doing mine very soon


    Sent from my iPhone using Tapatalk


  13. Thanks Tjk thanked for this post
  14. Top Of Page | #8
    HKBIGDADDYDIESELDAN's Avatar

    User Info Menu

    Re: Blinding Longhorn chrome center console bezel

    Great job looks good bud

    2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
    Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs

  15. Top Of Page | #9
    DDP's Avatar

    User Info Menu

    Re: Blinding Longhorn chrome center console bezel

    Absolutely gorgeous bud! I love seeing people and the mods they do. Thank you for sharing with everyone.

    Matthew 6:9-13, 2 Corinthians 5:20
    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email us at:
    sales@ddpmotorsports.com
    www.ddpmotorsports.com


  16. Thanks IGOTACUMMINS, Tjk thanked for this post
  17. Top Of Page | #10
    Diesel Babe cumminsbadgirl's Avatar

    User Info Menu

    Re: Blinding Longhorn chrome center console bezel

    Looks great !!
    Nice write -up !


    "Cumminsbadgirl"
    2014 Cummins Mega 3500 ( Aisin ) 4X4


    2014 CUMMINS "BADGIRL" Laramie MC 3500 (Aisin) 4X4 MM3 Tuned by Double R Diesel *** EGR delete AFE CAI 4” FLO-PRO w/muffler 4" Zone lift, Federal Couragia 37’s with Black Rhinos,bed carpet kit, tail-gate assist, Retrax tunnau cover

    Previous "Cummins Badgirls" :
    2006 Cummins 2500 4x4
    2012 Cummins 2500 4x4

  18. Thanks IGOTACUMMINS, Tjk thanked for this post
Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •