Recently did a 5" flop pro TBE and have had a vibration I added a extra hanger on the long pipe checked all clamps including clamp for down pipe and can't get rid of it any advice would be great. Thanks
Sent from my iPhone using Tapatalk
Recently did a 5" flop pro TBE and have had a vibration I added a extra hanger on the long pipe checked all clamps including clamp for down pipe and can't get rid of it any advice would be great. Thanks
Sent from my iPhone using Tapatalk
So quick update if I loosen all the clamps vibration goes away. This leads me to believe that it's in a bind some where but it all looks good. The vibration doesn't come back till I tighten the clamps around the muffler.
Sent from my iPhone using Tapatalk
Vibration in the cab? Did you make sure all the pipes are pressed into each other all the way? I used a rubber mallet to tap all pieces together and tightened down prolly more than I should've.
Sent from my VS995 using Tapatalk
2016 Ram 2500, Deleted & Tuned by DRD, 5 in Flo-Pro exhaust, REVMAX ZeroFlex Valve Body, Thuren 2.5 Fox suspension.
Its vibration right? Not rattling
Sent from my VS995 using Tapatalk
2016 Ram 2500, Deleted & Tuned by DRD, 5 in Flo-Pro exhaust, REVMAX ZeroFlex Valve Body, Thuren 2.5 Fox suspension.
Yes vibration
Sent from my iPhone using Tapatalk
Are you talking about during acceleration especially during hard acceleration
No muffler?
Nope sorry smooth under acceleration terrible at idle just 2% throttle smooths it out.
Sent from my iPhone using Tapatalk
Oh sorry and yes I have a muffler
Sent from my iPhone using Tapatalk
get rid of muffler LOL
That's my next step. On my 2500 I have it 4" straight pipe and the drone when towing heavy kills me.
Sent from my iPhone using Tapatalk
Bookmarks