Hey guys I have a longhorn with 18" wheels. I really want to throw 35's on there but I'm a little nervous about them only being 8" wide. Has anyone done this? Any issues? Thanks guys!
Thanks: 3
Likes: 6
Hey guys I have a longhorn with 18" wheels. I really want to throw 35's on there but I'm a little nervous about them only being 8" wide. Has anyone done this? Any issues? Thanks guys!
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
@CustomOffsets?
🏁Join us as a Lifetime Platinum Member today!🏁
18's so you have a 2012 or newer then. You'll be fine. The width is more what you need to watch
I've got a 09 with the stock 17's running 34.4" x 12.4 wide
The width is what I'm worried about as 35" tires seem to need 8.5" minimum.
Power247 liked this post
Pretty much every tire fitment site will tell you that. And not saying they are wrong but tons of guys run 35 x 12.50s on factory rims without an issue with the bead breaking loose.Originally Posted by RAMDEERE
It's the other width factor you have to be aware of... Expect them to rub control arms when turning sharp unless you run spacers.
**EDIT**
Greg
2012 | RAM 2500 | CCSB | Custom tuned by Double R Diesel
2016 | Heartland Pioneer | DS310
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
RAMDEERE thanked for this post
Just buy 35's that aren't 12.5 wide.
- 1995 Dodge Ram 1500 5.9l (Sold)
- 2003 Dodge Ram 5.9 Cummins 75k miles (R.I.P gone but not forgotten)
- 2014 Ram 2500 Tradesman 95k miles work truck about to be deleted for the first time
https://www.instagram.com/mikemackyo/
I am running 35/12.50/17 on my 2012 stock rims I don't think you'll have any problems running 35/12.50/18 on your factory rims bud
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Will a 305/55/r20 (about 33x12) rub control arms on stock 2017? Stock 20" rims, stock height.
Currently on a 295/60/r20 without any problems.
Power247 liked this post
X2I am running 35/12.50/17 on my 2012 stock rims I don't think you'll have any problems running 35/12.50/18 on your factory rims bud
Running 35x12.5 on stockers with out a problem. They do rub a little as mentioned but only when turning sharply.
2012 Ram 3500 Laramie, 3" BDS Coil over, DuraFlap, 68RFE, 4.10, 35s, Front receiver, Krown protected
Power247 liked this post
I also run a 35' tire 285/75/18 on stock laramie rims,these tires are 11.50 wide they rub on the control arms!
Power247 liked this post
Posting Permissions
Register To Reply
Bookmarks