5 inch flo pro fitment issue

[BigBlackCummins33]

I DONT HAVE A FLO PRO I HAVE TB MBRP 5", BUT MY BUDDY HAS THE FP 5" TB AND WE HUNG THE DOWN PIPE & FIRST EXTENTION THEN THE TAIL...THEN WE PUT THE TAIL WHERE WE WANTED IT TO SIT AND CUT THE SPACER TO FIT SNUG BETWEEN THEM NICE TIGHT FIT NOW AND TAIL SITS ANOUT A INCH FROM THE BOTTOM PANNEL. WE ALSO CUT TAIL BACK FOR TIP SO THAT THE TRUCK DUMPS JUST UNDER THE BED AND NOT OUT ON THE BACK PANNEL. HTH

 0 Comment(s)

[bloombloom88]

I DONT HAVE A FLO PRO I HAVE TB MBRP 5", BUT MY BUDDY HAS THE FP 5" TB AND WE HUNG THE DOWN PIPE & FIRST EXTENTION THEN THE TAIL...THEN WE PUT THE TAIL WHERE WE WANTED IT TO SIT AND CUT THE SPACER TO FIT SNUG BETWEEN THEM NICE TIGHT FIT NOW AND TAIL SITS ANOUT A INCH FROM THE BOTTOM PANNEL. WE ALSO CUT TAIL BACK FOR TIP SO THAT THE TRUCK DUMPS JUST UNDER THE BED AND NOT OUT ON THE BACK PANNEL. HTH

I didn't have to do any cutting on mine, I used all included pipe in the kit, tailpipe now sits exactly how I like it after some adjustment

Sent from my SAMSUNG-SM-N920A using Tapatalk

 0 Comment(s)

[gene.wells69]

I had no issues with mine...




2012 Ram 2500 SLT Big Horn CCSB | 6.7 CUMMINS H.O. | EFI Live by Hardway Performance & CSP5 | Edge Insight CTS2 in pillar pod w/ EGT | S&B CAI with Ram Air Tube |5" Flo-Pro Straight Turbo Back | EGR & Cooler Delete | CCV Tube Delete | Throttle Valve Delete

 0 Comment(s)

[easttxram]

My exhaust disconnected under my back seat while on the highway tonight, after a 2nd attempt the tailpipe slipped into the hanger and fits like it should. https://uploads.tapatalk-cdn.com/201...2003aad7c7.jpg

Sent from my SAMSUNG-SM-N920A using Tapatalk

I had the same problem. Took it back to my shop the next day and used my MIG welder to put a little tack on both sides of the pipe at each joint and then put the clamps back on. 5000 miles later I've had no more trouble out of mine.


Sent from my iPad using Tapatalk

 0 Comment(s)