Who knows what these codes are P0007 and P0107 on gen 4 2012 Cummins ?
Thanks: 6
Likes: 5
Who knows what these codes are P0007 and P0107 on gen 4 2012 Cummins ?
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
0007 is ecm not getting a proper signal from the fuel shut off valve, and 0107 is a map sensor code.
2015 Black Laramie CCSB 3500 SRW. Thuren Leveled With Fox 2.0 Shocks. Ride Rite Rear Air Bags With Wireless Airlift Onboard Air. 35" Toyos. All The Options Minus The Soot Cookers. RaceMe Ultra.
Thanks @RATLIN'HP how do I figure out how to fix that code for fuel shut off valve p0007 ?
Sent from my iPad using Tapatalk
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Does the truck start, and shut down ok? If so clear the code and see if it comes back. If not or if it does come back I think I'd check the connection on the fuel shut off valve, look for a broken wire, and those simple things. Beyond that the valve itself could need replaced or there is a problem with the ecm, and an advanced scan tool would be needed to find out for sure what the problem is so you don't throw money at it that don't fix it, so I'd go to a pro for that.
2015 Black Laramie CCSB 3500 SRW. Thuren Leveled With Fox 2.0 Shocks. Ride Rite Rear Air Bags With Wireless Airlift Onboard Air. 35" Toyos. All The Options Minus The Soot Cookers. RaceMe Ultra.
HKBIGDADDYDIESELDAN thanked for this post
HKBIGDADDYDIESELDAN liked this post
Yes truck starts and runs I just deleted the crap EGR and Installed 5" TBE Flo Pro Exhaust with the RaceMe programmer just hit over 100,000 miles the other day so I don't believe anything wrong with ecm and unplugged egr valve and cooler and now getting that codeOriginally Posted by RATLIN'HP
Thanks @ Ratlin'HP
Sent from my iPad using Tapatalk
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Brendan Warhol thanked for this post
Did the codes come right after you unplugged egr stuff? You might of unplugged the map sensor by mistake! Lot of guys have mistakenly unplugged the map for the throttle valve plug.
2015 Black Laramie CCSB 3500 SRW. Thuren Leveled With Fox 2.0 Shocks. Ride Rite Rear Air Bags With Wireless Airlift Onboard Air. 35" Toyos. All The Options Minus The Soot Cookers. RaceMe Ultra.
HKBIGDADDYDIESELDAN thanked for this post
HKBIGDADDYDIESELDAN liked this post
Yes I did unplug the map sensor also unplugged egr valve and cooler then plugged map sensor back in yes codes came after programmer
Thanks
Dan
Appreciate the help
Sent from my iPad using Tapatalk
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Posting Permissions
Register To Reply
Bookmarks