I removed mine and put a compressor and air tank in its place...
I removed mine and put a compressor and air tank in its place...
I’ve got air in my toolbox with a female coupler running back to the hitch.
I could do water meth in the toolbox, too, but I wanted to try and see what was done for def to work.
I was thinking of doing a sump on it and then using A boost kit/
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Dude, this is perfect!
More info?
When the tank and cross member are removed does it hurt or help the frame?
Mine whole deal is out and wondering if I should install the cross piece back with out the tank
Not really sure, will be following. I would put it back, if nothing else it will allow you to reinstall the skid plate for the transfer case.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
That's very true I forgot about that other little skid plate
I emailed raceme Canada, and they said I had to leave the def tank in and hooked up, even after being tuned.
Can anyone verify it can all ve removed with RMU?
Not that it will still be used still, just led me to believe it couldn't be disconnected... now it'd easy to test... but...
Not sure why the DEF tank would need to be left connected, unless there is something with their tune that needs it to be there. I would ask them why and what happens if it’s removed.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
Exactly what my thoughts we're as well
Or
Get warp tunes?
Not sure that's a route you could consider or not
I would think with the doc's magic, adjustments can be made, or his way already fixes your question
II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX
The end result will be warp tunes, yes.
Bookmarks