Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: No start dodge

  1. Top Of Page | #1
    Basic Member jbloodus's Avatar

    User Info Menu

    Exclamation No start dodge

    Early 04 dodge wouldn't start determined it was injectors replaced with remans ran real tough double checked they were the right ones they are. Now won't start replaced lift pump. Still no start. There is no fuel coming from the high pressure out let of the Inj pump. During cranking or at warm up. There is power to the pump. Pretty sure it's a bad pump. Though I heard somewhere a bad fan clutch can cause ECM problem Preventing start. Any one know if this is true? Any other ideas on why no start. I don't want to pull the pump if I don't have to or at least try all the easier stuff 1st.

    Thanks for reading.


  2. Top Of Page | #2
    Old & Grumpy! Polaraco's Avatar

    User Info Menu

    Re: No start dodge

    Check your fuse.

    Fan clutch will not cause this. That's bad info.

    Is this a factory pump in the tank?


    2003- 3500 RWD Automatic.
    S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95,
    50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •