Getting ready to install raceme exshaust and egt probe this weekend. Question is any tricks to install probe? Do you just dril and tap it in place? What has everyone else done? This is my first attempt at doing it. Thanks in advance for any input
Getting ready to install raceme exshaust and egt probe this weekend. Question is any tricks to install probe? Do you just dril and tap it in place? What has everyone else done? This is my first attempt at doing it. Thanks in advance for any input
2015 2500 CCSW Outdoorsman black badging, ram matts black steps, XD Crank 801's with 35/12.50/18 Toyo MT's, tinted widows, BDS 2" leveling kit with shocks race me ultra, flo pro 5" turbo back exhaust
If you are doing the EGR cooler delete then there is already a pre tapped hole in the rear block off plate that's what I used and many others also. Make sure you use some loctite!
Not doing egr delete yet
2015 2500 CCSW Outdoorsman black badging, ram matts black steps, XD Crank 801's with 35/12.50/18 Toyo MT's, tinted widows, BDS 2" leveling kit with shocks race me ultra, flo pro 5" turbo back exhaust
Then you have a good question and I want to hear what the answer is.
im still learning my wait around this 6.7, can you give me a better description or pic of where this pre tapped hole is?
2012 Ram 3500. Full delete. H&S mini maxx. NextGen valvebody. Fuel Maverick wheels, Toyo MT tires. 35/12.5/20. Amp power steps.
When you pull the egr cooler out to delete, if you go that route, you’ll be given egr block off plates to go in the place of where the egr cooler bolted. Plate that goes on the rear of the manifold has a pre-taped hole for the probe.
Circled I’m yellow is the pre-tapped hole in the center of the plate.
I see now, thank you sir! Are there good and crappy egt probes to get? Anyone you recommend? I have the mini maxx tuner
Sent from my iPhone using Tapatalk
2012 Ram 3500. Full delete. H&S mini maxx. NextGen valvebody. Fuel Maverick wheels, Toyo MT tires. 35/12.5/20. Amp power steps.
Have no clue if any certain one works with minimaxx to be honest. I googled searched and seen that bully dog offers one that is compatible with the minimaxx, but have no clue how reliable that is. I had raceme tuner and mm3 so platforms are a little different than the minimaxx.
Are you tuned at all? If you plan to delete in the future but aren't deleted or tuned yet just get some sort of display unit and use the sensors that are already there. That way you can even tell when the truck is doing a Regen.
Bookmarks