My First Retro - Adding Projectors And HIDs To My 2012 RAM

[Power247]

And for only $60, I couldn't pass them up! Ok, on the H1, V3 projectors with GG shrouds and the quad headlight, can I use a set of H11 HIDS that I already have and just use the stock high beam bulb or do I need to get the H1 HID bulbs?

2012 Ram 2500, 4x4, 3.73, 3" level, 35" tires, 4" FloPro TBE, EGR valve/cooler/throttle delete, S&B CAI, GDP heater delete, GDP S2, RaceME Ultra Warp Tuning

No kidding $60 is a steal!!

You have to get new H1 bulbs. The base on the H11s will not fit the H11 socket on the V3s.

Greg
2012 | 2500 | CCSB | Custom MCC by Double R Diesel

 0 Comment(s)

[theaaronbush]

No kidding $60 is a steal!!

You have to get new H1 bulbs. The base on the H11s will not fit the H11 socket on the V3s.

Greg
2012 | 2500 | CCSB | Custom MCC by Double R Diesel

Gotcha...so it'll work as a bi-xenon bulb with the correct harness or will I still be able to use the factory halogen. High beam?

2012 Ram 2500, 4x4, 3.73, 3" level, 35" tires, 4" FloPro TBE, EGR valve/cooler/throttle delete, S&B CAI, GDP heater delete, GDP S2, RaceME Ultra Warp Tuning

 0 Comment(s)

[Power247]

Gotcha...so it'll work as a bi-xenon bulb with the correct harness or will I still be able to use the factory halogen. High beam?

2012 Ram 2500, 4x4, 3.73, 3" level, 35" tires, 4" FloPro TBE, EGR valve/cooler/throttle delete, S&B CAI, GDP heater delete, GDP S2, RaceME Ultra Warp Tuning

All depends on how you wire them up. If you use the H13 relay harness the projector will handle highbeams but you will lose factory highbeam function without splicing. If you use H11 harness you will keep factory highbeam but lose control of the projector highs without splicing wires.

Sent from my SM-G900V using Tapatalk

 0 Comment(s)

[theaaronbush]

All depends on how you wire them up. If you use the H13 relay harness the projector will handle highbeams but you will lose factory highbeam function without splicing. If you use H11 harness you will keep factory highbeam but lose control of the projector highs without splicing wires.

Sent from my SM-G900V using Tapatalk

I seriously never use high beams so I guess either harness will work for me

2012 Ram 2500, 4x4, 3.73, 3" level, 35" tires, 4" FloPro TBE, EGR valve/cooler/throttle delete, S&B CAI, GDP heater delete, GDP S2, RaceME Ultra Warp Tuning

 0 Comment(s)

[Power247]

I seriously never use high beams so I guess either harness will work for me

2012 Ram 2500, 4x4, 3.73, 3" level, 35" tires, 4" FloPro TBE, EGR valve/cooler/throttle delete, S&B CAI, GDP heater delete, GDP S2, RaceME Ultra Warp Tuning

The highbeam function of the projectors is a significant increase from factory highs.

Greg
2012 | 2500 | CCSB | Custom MCC by Double R Diesel

 0 Comment(s)