@TX NIGHT TRAIN how hard was it to paint head light?
Thanks: 17
Likes: 17
@TX NIGHT TRAIN how hard was it to paint head light?
2015 2500 CCSW Outdoorsman black badging, ram matts black steps, XD Crank 801's with 35/12.50/18 Toyo MT's, tinted widows, BDS 2" leveling kit with shocks race me ultra, flo pro 5" turbo back exhaust
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
It's not bat at all. Opening them up takes a little patience but it's not really that hard at all.Originally Posted by LB Heating
Sent from my SM-G900V using Tapatalk
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
IGOTACUMMINS liked this post
I want to do this when the weather gets warmer. Never been afraid to try new things, but I can get a new set of lights if all goes horribly wrong
IGOTACUMMINS liked this post
I bought a cheap set off eBay. Opened them, added projectors etc... kept the stock quads in case something went wrong and need to go back. I learned a lot doing the first set. Really thingies about doing my quads now...I want to do this when the weather gets warmer. Never been afraid to try new things, but I can get a new set of lights if all goes horribly wrong
Before
After
Sent from my SM-G900V using Tapatalk
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
It really isn't bad. Patience is the key! May take a few heat cycles to get them open. Make sure and prep the bezel so the paint will stick. Like others you can buy a cheap set off eBay some are already black. That way you can save the oem if there is an issue.
IGOTACUMMINS liked this post
Thanks for the info guys sounds like best bet is order a set of eBay as the stock ones are a little pricey to replace.
2015 2500 CCSW Outdoorsman black badging, ram matts black steps, XD Crank 801's with 35/12.50/18 Toyo MT's, tinted widows, BDS 2" leveling kit with shocks race me ultra, flo pro 5" turbo back exhaust
IGOTACUMMINS thanked for this post
do those projectors make a difference? I know I am surprised how dim the factory lights seem to be.
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
@rob d is the man on custom lights. Show them some!
Ask us how to become a Lifetime Platinum Member today!
Man, I cannot even describe the difference. No way could I go back to stock lights again. HIDs in projectors is the only way for me.
Greg
2012 | 2500 | CCSB | Custom MCC by Double R Diesel
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
Agree!! @rob d is a wizard when it comes to painted headlights.
Greg
2012 | 2500 | CCSB | Custom MCC by Double R Diesel
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
Posting Permissions
Register To Reply
Bookmarks