Thanks Thanks:  10
Likes Likes:  5
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Fuel leak can't find it

  1. Top Of Page | #11
    Permanent Vacation AccurateDiesel's Avatar

    User Info Menu

    I can't picture that lift bracket at the moment, but certainly don't anticipate any issues from running w/o an engine lift bracket temporarily.


  2. Top Of Page | #12
    Basic Member 4x4kingx889's Avatar

    User Info Menu

    I did your trick with the baby powdered and all looked good after a nice run expect number 2 had some wetness around it I'll try to pull that tube out and do the same thing I did to #5


  3. Top Of Page | #13
    Old & Grumpy! Polaraco's Avatar

    User Info Menu

    Quote Originally Posted by 4x4kingx889 View Post
    Pulled the tube out looked new had a orange o ring which looked in good shape I put a little grease on it and reinstalled and torqued it down...also can I run the engine with the lift brackit off to make it easier to look for leaks?
    Quote Originally Posted by AccurateDiesel View Post
    I can't picture that lift bracket at the moment, but certainly don't anticipate any issues from running w/o an engine lift bracket temporarily.
    Take it out and save it. Doesn't do anything for you except add a pound to the truck


    2003- 3500 RWD Automatic.
    S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95,
    50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC

  4. Top Of Page | #14
    Permanent Vacation AccurateDiesel's Avatar

    User Info Menu

    Great - maybe re-seating it did the trick.


  5. Top Of Page | #15
    Basic Member 4x4kingx889's Avatar

    User Info Menu

    Yes I will try #2 tomorrow it is the only one leaking now


  6. Top Of Page | #16
    Basic Member 4x4kingx889's Avatar

    User Info Menu

    I did same thing with #2 and it appears I have no more leaks


  7. Top Of Page | #17
    Old & Grumpy! Polaraco's Avatar

    User Info Menu



    Just remember Tim if you need injectors or a pump. Please


    2003- 3500 RWD Automatic.
    S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95,
    50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •