Thanks: 1
Likes: 0
was wandering if anyone has lowered there 2wd truck by just taking out the rear 1 1/2" blocks. do you take both out or just the one. there are 2 per side. Since i've taken my service body off and put the regular bed on it sits really high in the rear.
IGOTACUMMINS thanked for this post
Not exactly the same but my '12 2500 had 3 - 1/2" blocks between the axle and the leaf pack. Removing 2 of them left a bit of rake. If I had removed all 3 it would have leveled the truck completely.
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
well ive got those blocks (1 1/2") but then it also has a 4" or 5" block on both sides too. I'm fine with the back up up a bit but i didn't want to take out the wrong ones and was curious if it would affect performance handling.
I have to look again, but it seems to me my 03 is 1 solid block.
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
Posting Permissions
Register To Reply
Bookmarks