Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6

Thread: One ton tailgate light measurements...

  1. Top Of Page | #1
    Basic Member

    User Info Menu

    One ton tailgate light measurements...

    OK as requested here are the pics, and measurements I took off a 1992 Cummins D350 reg cab dually tailgate. The tailgate was damaged, but in great shape.

    So if you want to install lights in the correct location, here are all the pics, and measurements you will need o make it look factory correct.












  2. Top Of Page | #2
    Basic Member

    User Info Menu









    Measurements for the light mounting is a .865" hole in the middle, with an outer spacing of the screws set at 3".


  3. Top Of Page | #3
    Basic Member

    User Info Menu







    You can see the hole with the small body plug right under neath it. That is the dead center light. The center of that light is set at the exact middle of the tailgate.




  4. Top Of Page | #4
    Old & Grumpy! Polaraco's Avatar

    User Info Menu

    Wiring the deck with low voltage Brian?

    Great info Thanks


    2003- 3500 RWD Automatic.
    S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95,
    50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC

  5. Top Of Page | #5
    Basic Member

    User Info Menu





    And the hole, and notch required for the wiring to pass through. This is on the LH side of the tailgate.



    Hope this helps.


  6. Top Of Page | #6
    Basic Member

    User Info Menu

    Guess just in case these photos disappear there should be some hard text measurements.

    There are 5 lights. The middle of the center light is placed in the exact center of the tailgate. Then the next two lights, to the left and right of the center light are placed 7.5" center to center.

    The final two lights are placed 22" center to center off the last two that were installed. So about 29.5" center to center off the 1st light.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •