Thanks Drew.
Given the weather is deteriorating, and I lacked manpower, I opted to open the bed. At least it was a neat job. I fish plated the patch back in. Good thing I did that too. The gauge float was sticking. The manual says to point the connections towards the frame 90*. But the connections rotate on the top too. I must have disturbed them. I had to go back in and rotate the module some to free the float. Can you imagine if I did that by taking the tank down? All I had to do was pull the liner out and remove the screws. Took longer to get all the rigging crap I carry out.
Bookmarks