Thanks Thanks:  14
Likes Likes:  33
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: If You Need Help Protocol

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Top Of Page | #1
    Old & Grumpy! Polaraco's Avatar

    User Info Menu

    If You Need Help Protocol

    Gotta bump this guys.

    Use your heads. We don't live next door so we don't know what you have and can't see the problem. GIVE US SOME INFO UP FRONT PLEASE. This isn't the other forums with know it alls. We look for the answers in our resources. Some of us have lots of experience and know how. Can't help you if we don't know what you have or what it's doing.


    2003- 3500 RWD Automatic.
    S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95,
    50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC

  2. Thanks david3gen thanked for this post
    Likes AnOldBiker, 1BdKntryboy, david3gen liked this post
  3. Top Of Page | #2
    WE WILL STAND! IGOTACUMMINS's Avatar

    User Info Menu

    If You Need Help Protocol

    We're sorry but that isn't possible at this time due to the Desktop View, Mobile View, or App View all being different.

    *Ask about becoming a Lifetime Platinum Member Today*

    "The grass is greener where you water it"


  4. Likes Power247 liked this post
  5. Top Of Page | #3
    Old... But Still Here! AnOldBiker's Avatar

    User Info Menu

    If You Need Help Protocol

    Is it possible to have a window when signing up saying to "please add your vehicle information in the signature section at this time" ? Or even a comment of this ?



    Jim


    2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17

    "Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan

  6. Likes 1BdKntryboy liked this post
  7. Top Of Page | #4
    WE WILL STAND! IGOTACUMMINS's Avatar

    User Info Menu

    If You Need Help Protocol

    We think we have an idea!

    Stay tuned.

    *Ask about becoming a Lifetime Platinum Member Today*

    "The grass is greener where you water it"


  8. Top Of Page | #5
    Old & Grumpy! Polaraco's Avatar

    User Info Menu

    If You Need Help Protocol

    Another problem is that Tap-a-yak. We can't see signatures back and forth.

    Technology. Gotta love it. Phones are supposed to be phones. I've had a cell phone since 1988. Now. . Man not livith with Cell Phone Tatoo'd to butt


    2003- 3500 RWD Automatic.
    S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95,
    50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC

  9. Likes walla2k5 liked this post
  10. Top Of Page | #6
    GrayBeard68's Avatar

    User Info Menu

    If You Need Help Protocol

    Polaraco says "I've had a cell phone since 1988.

    Now... Man not livith with Cell Phone Tatoo'd to butt"

    Now, if you don't find that funny, YOU are way too young!

    Just read through the thread while taking a break, and have to say I feel the same. Run into this on other sites (snowmobile & atv).

    Just love that last sentence!

    Made me laugh out loud!


  11. Top Of Page | #7

    If You Need Help Protocol

    I have a 2017 RAM 2500, full delete, EGR, DEF, and DPF.

    It has about 160k miles since the delete.

    Tyranny wants to "pop out of gear" when towing, even if I get on it hard.

    I got the P0871 code which indicates a pressure problem in the tyranny usually associated with design problems related to the valve body.

    We had this in one of our 2018 trucks, and I just installed a remanufactured valve body and a thermal bypass before researching it myself.

    It was happening in 2017, and I understand it would've been better to install something like a Revmax or ATS and run the transmission pressure higher.

    I guess some programming changes are necessary to do that.

    I want to contact the guys that initially helped me with the delete (which I installed) and see if they do any of that programming.

    It is nearly impossible to get ahold of anyone, and I'm not super savvy at navigating the private message part of the site.

    I tried to leave a private message for DRD, but I don't know if that got to them.

    I'm unsure of how to proceed, and thus problem persists.

    Can I get instructions on contacting them, or what username should I put in to get to them?

    I purchased three delete kits from them back in 2017-18

    Truck VIN on 2017: 3C6UR5NL3HG664525


  12. Thanks IGOTACUMMINS thanked for this post
    Likes IGOTACUMMINS liked this post
  13. Top Of Page | #8
    WE WILL STAND! IGOTACUMMINS's Avatar

    User Info Menu

    If You Need Help Protocol

    Quote Originally Posted by Stephan2018 View Post
    I have a 2017 RAM 2500, full delete, EGR, DEF, and DPF.

    It has about 160k miles since the delete.

    Tyranny wants to "pop out of gear" when towing, even if I get on it hard.

    I got the P0871 code which indicates a pressure problem in the tyranny usually associated with design problems related to the valve body.

    We had this in one of our 2018 trucks, and I just installed a remanufactured valve body and a thermal bypass before researching it myself.

    It was happening in 2017, and I understand it would've been better to install something like a Revmax or ATS and run the transmission pressure higher.

    I guess some programming changes are necessary to do that.

    I want to contact the guys that initially helped me with the delete (which I installed) and see if they do any of that programming.

    It is nearly impossible to get ahold of anyone, and I'm not super savvy at navigating the private message part of the site.

    I tried to leave a private message for DRD, but I don't know if that got to them.

    I'm unsure of how to proceed, and thus problem persists.

    Can I get instructions on contacting them, or what username should I put in to get to them?

    I purchased three delete kits from them back in 2017-18

    Truck VIN on 2017: 3C6UR5NL3HG664525
    We are sending you a PM now.

    Thank you,
    igotacummins

    "The grass is greener where you water it"


  14. Thanks Corkey, AK Bob thanked for this post
    Likes Corkey, AK Bob liked this post
  15. Top Of Page | #9
    Owentabor1's Avatar

    User Info Menu

    If You Need Help Protocol

    Why was my post removed from here and platinum discussions?


  16. Likes Corkey liked this post
  17. Top Of Page | #10
    WE WILL STAND! IGOTACUMMINS's Avatar

    User Info Menu

    If You Need Help Protocol

    Quote Originally Posted by Owentabor1 View Post
    Why was my post removed from here and platinum discussions?
    You had two of the same post, and we removed the one.

    Also, we moved the post to the correct category as it's not needed to be behind closed doors.

    Thank you,
    igotacummins

    "The grass is greener where you water it"


  18. Likes AK Bob, Corkey liked this post
Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •