What Did You Do To Your 4th Gen Today?

[TexNeck]

Had a big day yesterday. Picked my truck up from the shop with a newly installed Carli Backcountry 3.25” lift, as well as some new 20” Hostile Gauntlet wheels with +10 offset, and for sneakers, 37” Toyo Open Country RTs. They also installed a Redhead steering box.. which I highly HIGHLY recommend. The truck drives like a dream. Better than stock by a million miles. Here’s some eye candy!

Looks real nice! 37s clear at full lock with that setup?

 0 Comment(s)

[Mariner]

Looks real nice! 37s clear at full lock with that setup?

thank you! And unfortunately not. They went to drive it off the lift and it fetched up immediately on the flare. So they cut back the liner, flare nub behind the screw, and ground down some of the pinch weld. I wasn’t willing to downsize tires so we went to the knife.

 0 Comment(s)

[cumminsbadgirl]

Had a big day yesterday. Picked my truck up from the shop with a newly installed Carli Backcountry 3.25” lift, as well as some new 20” Hostile Gauntlet wheels with +10 offset, and for sneakers, 37” Toyo Open Country RTs. They also installed a Redhead steering box.. which I highly HIGHLY recommend. The truck drives like a dream. Better than stock by a million miles. Here’s some eye candy!

Sharp !!
Loving that stance


2014 Laramie MC 3500 (Aisin) 4X4
MM3/DRD, *** EGR Delete
AFE CAI, 4” FLO-PRO w/muffler, 4” Zone lift w/37 Federal Couragia’s/Black Rhinos

 0 Comment(s)

[watersupply189]

Had a big day yesterday. Picked my truck up from the shop with a newly installed Carli Backcountry 3.25” lift, as well as some new 20” Hostile Gauntlet wheels with +10 offset, and for sneakers, 37” Toyo Open Country RTs. They also installed a Redhead steering box.. which I highly HIGHLY recommend. The truck drives like a dream. Better than stock by a million miles. Here’s some eye candy!

Very nice setup friend!


2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!

 0 Comment(s)

[TexNeck]

thank you! And unfortunately not. They went to drive it off the lift and it fetched up immediately on the flare. So they cut back the liner, flare nub behind the screw, and ground down some of the pinch weld. I wasn’t willing to downsize tires so we went to the knife.

Understood!

I had the same issue with my level/35s.

A little trim/hammer job hasn’t hurt any truck that I’ve heard of!

Once you get tired of climbing in/out with regular steps shoot me a PM/email and I’ll get you hooked up with the AMP XL power steps.

Enjoy the ride!

 0 Comment(s)

[flanagan]

Have not put it on yet.

https://uploads.tapatalk-cdn.com/201...d78239b872.jpg

Sent from my SM-G950U1 using Tapatalk

Sent from my SM-G973U using Tapatalk

 0 Comment(s)

[Mega Man]

Subbing, fun ideas everyone, just perused from post 1.

 0 Comment(s)

[flanagan]

Still working on finding time for the install.


Sent from my SM-G973U using Tapatalk

 0 Comment(s)

[Abgunnar]

I made a custom air intake, I used leftover 4” stainless exhaust pipe I had and powder coated it, and just had to buy the boots and clamps. Had to use a adaptor to go to the stock elbow at the Turbo and a reducer at the air box the stock pipe is 4.5 od and so is the connection on the elbow at the turbo. C98AF923-4F15-41DC-B0F1-63FAF798148B.jpeg4A6B308C-B0FF-4EF7-A940-C22E3C0FC0A3.jpeg5F298B9C-ADE9-408A-828F-77854BBC30B0.jpeg4AFA9FC1-00CA-4293-A0A5-2267613B715C.jpeg

 0 Comment(s)

[watersupply189]

I made a custom air intake, I used leftover 4” stainless exhaust pipe I had and powder coated it, and just had to buy the boots and clamps. Had to use a adaptor to go to the stock elbow at the Turbo and a reducer at the air box the stock pipe is 4.5 od and so is the connection on the elbow at the turbo. C98AF923-4F15-41DC-B0F1-63FAF798148B.jpeg4A6B308C-B0FF-4EF7-A940-C22E3C0FC0A3.jpeg5F298B9C-ADE9-408A-828F-77854BBC30B0.jpeg4AFA9FC1-00CA-4293-A0A5-2267613B715C.jpeg

That looks great!!


2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!

 0 Comment(s)