@raayyy_raayyy. Yes. There are 2 fairly large holes behind the tailgate badge. Plus, the badge area is recessed. It is a bit of work to delete it.
Greg
2012 | RAM 2500 | CCSB | Custom tuned by Double R Diesel
2016 | Heartland Pioneer | DS310
@raayyy_raayyy. Yes. There are 2 fairly large holes behind the tailgate badge. Plus, the badge area is recessed. It is a bit of work to delete it.
Greg
2012 | RAM 2500 | CCSB | Custom tuned by Double R Diesel
2016 | Heartland Pioneer | DS310
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
No I don't have any noises from doing the delete.
I'd look it over again if I was you.
Sounds like the t-case isn't unlocking, or maybe it's a year model thing? That's strange.
Sent from my Pixel XL using Tapatalk
2021 3500 Mega HO DRW
You can fix that by tapping the cab light harness for power instead of the panel lights. Mine still blink and come on with the lights. Just throwing it out there.
Sent from my Pixel XL using Tapatalk
2021 3500 Mega HO DRW
I may try that this weekend. Thanks.
Sent from my XT1565 using Tapatalk
Did you use the diodes and resistor or just tap straight in?
Sent from my XT1650 using Tapatalk
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
You will need a resistor to prevent hyper flash. A buddy of mine made a nifty little Y-harness deal that had the resistor in it and I just t tapped that in place. I don't recall the ohm of the resistor though. But I can find out, that guy is gonna be at my house on thursday
Sent from my Pixel XL using Tapatalk
2021 3500 Mega HO DRW
Sounds good.
Sent from my XT1565 using Tapatalk
Resealing my passenger headlight since it was getting some moisture in it....Hopefully I did this right!! 😬😬😬😬😬
Sent from my Pixel XL using Tapatalk
2021 3500 Mega HO DRW
Check also that your turn signal bulb is seated well. I had an issue with one of mine after my retrofit and that turned out to be the culprit
Sent from my XT1650 using Tapatalk
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
Bookmarks