Thanks Thanks:  1,025
Likes Likes:  4,138
Page 113 of 148 FirstFirst ... 1363103111112113114115123 ... LastLast
Results 1,121 to 1,130 of 1473

Thread: What Did You Do To Your 4th Gen Today?

  1. Top Of Page | #1121
    MOD watersupply189's Avatar

    User Info Menu

    Quote Originally Posted by ViperCummins View Post
    I’m very happy with them. I think I’m going to hit the tops of all the screws with clear silicone tomorrow just to be safe though.
    Probably wouldn’t be a bad idea


    2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....

    2016 RAM 3500 4x4 Laramie Crew Cab
    Cummins,G56, Rough Country level, Morimoto LED fog lights, LED headlights, Lund Attitude Steps sprayed with Line-X, DRL's Activated, 35x12.50R18 Falken Wildpeak ATW3, Fuel Vapor Wheels Matte Black w/Dark Tint, A.R.E. Truck cap and swing boxes

  2. Likes cumminsbadgirl, walla2k5 liked this post
  3. Top Of Page | #1122
    4kids2dogs&RV's Avatar

    User Info Menu

    Coolant flush today at 127k on my 2011.
    Went ahead and did some preventive maintenance as well by replacing the water pump, tensioner, serpentine belt, upper and lower radiator hoses, radiator cap, coolant filter and lastly put in a 190 degree t-stat.
    Should be good for another 127k.


    Sent from my SM-N960U using Tapatalk


    2011 2500 Laramie CCSB 4x4, 6.7L Cummins, 68RFE

  4. Top Of Page | #1123
    Stewbuntu's Avatar

    User Info Menu

    I first added a molle panel to the back of the passenger seat, but when my parents visited I had to move the panel to have more room in the back seat for a road trip to key west. So I moved the panel behind the back seat. Today I added a few more things to my molle panels behind the back seat. After doing the mod for the back seat to hinge forward I added some molle panels by cutting a wrapdom brand 24x32 molle panel in half. After cutting it I melted the cut end and hung that edge down so I could use the rivets to mount the panels behind the seat. You will need to remove the thin grey foam panel that covers the wall behind the back seat. I got some cheap molle pouches for things like my winch controller, zipties, rope, locks for the trailer etc, an admin molle pouch with all my small tools to fix things on the vehicle off road like stems and stem valves, tire plugs, batteries for flash lights, etc in the pic, pouch for straps, d rings. Then I took my first aid kit and sewed some molle straps on the back and added that to the panel as well. I used a casserole dish bag for my first aid under the back seat bc it was thin enough to fit and it was big, now it fits behind the seat okay as well with the sewed on straps to mount it to the molle panel. I zip tied on some tire irons, and my breaker bar. I've been trying to take all the things I use off road, on my trailers, at camp, and use often, then put them away so they're not in my way unless I need them - it's giving me a lot of room underneath the seat to add other stuff I want, like a rain jacket for sudden down pours, shoes and socks for places (like the range) when I'm wearing sandals and forget shoes, ratchet set, 40 ft long strap.I also put my jack and the mount under the back seat against the back wall, so I could use the space under the passenger seat for my on board air, see the post in newbie guide to Cummins for that upgrade.

    Here is the panel:
    RAPDOM Tactical M.O.L.L.E. Panel, Black, 24" x 32" https://www.amazon.com/dp/B01F42XK6Y..._l.y5CbYXXFQ08

    GI stores have cheap used molle pouches



    Sent from my phone using Tapatalk

    2012 2500 ST w/ manmual 4x4 from the auction w 16k miles - Upgrades so far - Leather, LED bed lights, HID projectors, Nav = Appradio3 w ARU unchained reloaded full touch screencast & tailgate handle backup camera, homemade front hitch and reciever w 12k lb winch, reverse lights, soft open tailgate, transfercase linkage mod, Ultra and deletes, folding back seat mod, Kicker hideaway under drivers seat, Fumoto valve and safety clip, new warrantied turbo at 16k. Rocker Aux panel switches, Ford fold away bed extender, inverter outlet mod, soon an overhead console. Pulling a 2001 Prokat 2200WA around on my days off.

  5. Top Of Page | #1124
    MOD watersupply189's Avatar

    User Info Menu

    Quote Originally Posted by Stewbuntu View Post
    I first added a molle panel to the back of the passenger seat, but when my parents visited I had to move the panel to have more room in the back seat for a road trip to key west. So I moved the panel behind the back seat. Today I added a few more things to my molle panels behind the back seat. After doing the mod for the back seat to come forward I added some Molly panels by cutting a wrapdom molle panel and half. After cutting it I melted the cut 3nd and hung that edge down so I could use the rivets to mount the panels behind the seat. You will need to remove the thin grey panel cover that covers the wall in the back seat. I got some cheap molle pouches for things like my winch controller, zipties, and rope, an admin molle pouch with all my small tools to fix things on the vehicle off road light stems and stem valves, etc in the pic, pouch for straps, d rings, then I took my first aid kit and sewed some molle straps on the back and added those to the panel as well. I used a casserole dish bag for my first aid under the back seat bc it was thin enough to fit, it fit behind the seat okay as well once I sewed on some straps to mount it to the molle panel. I zip tied on some tire irons, and my breaker bar. I've been trying to take all the things I use off road, on my trailers, and use often, then put them away so they're not in my way unless I need them - it's giving me a lot of room underneath the seat to add other stuff I want, like shoes and socks for places (like the range) when I'm wearing sandals and forget shoes, ratchet set, 40 ft long strap, I put my jack and the mount under the back seat against the back wall, so I could use the space under the passenger seat for my on board air, see the post in newbie guide to Cummins for that upgrade.

    Here is the panel:
    RAPDOM Tactical M.O.L.L.E. Panel, Black, 24" x 32" https://www.amazon.com/dp/B01F42XK6Y..._l.y5CbYXXFQ08

    GI stores have cheap used molle pouches

    https://uploads.tapatalk-cdn.com/201...ae202afae6.jpghttps://uploads.tapatalk-cdn.com/201...eed7435769.jpghttps://uploads.tapatalk-cdn.com/201...02146e6dd3.jpghttps://uploads.tapatalk-cdn.com/201...48ace6c3b0.jpghttps://uploads.tapatalk-cdn.com/201...ae2d71a035.jpghttps://uploads.tapatalk-cdn.com/201...bfaa64ac1a.jpghttps://uploads.tapatalk-cdn.com/201...1b14b9f5cd.jpghttps://uploads.tapatalk-cdn.com/201...433061c158.jpg

    Sent from my phone using Tapatalk
    Nice setup!!


    2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....

    2016 RAM 3500 4x4 Laramie Crew Cab
    Cummins,G56, Rough Country level, Morimoto LED fog lights, LED headlights, Lund Attitude Steps sprayed with Line-X, DRL's Activated, 35x12.50R18 Falken Wildpeak ATW3, Fuel Vapor Wheels Matte Black w/Dark Tint, A.R.E. Truck cap and swing boxes

  6. Likes cumminsbadgirl, walla2k5 liked this post
  7. Top Of Page | #1125
    Diesel Babe cumminsbadgirl's Avatar

    User Info Menu

    Quote Originally Posted by Stewbuntu View Post
    I first added a molle panel to the back of the passenger seat, but when my parents visited I had to move the panel to have more room in the back seat for a road trip to key west. So I moved the panel behind the back seat. Today I added a few more things to my molle panels behind the back seat. After doing the mod for the back seat to hinge forward I added some molle panels by cutting a wrapdom brand 24x32 molle panel in half. After cutting it I melted the cut end and hung that edge down so I could use the rivets to mount the panels behind the seat. You will need to remove the thin grey foam panel that covers the wall behind the back seat. I got some cheap molle pouches for things like my winch controller, zipties, rope, locks for the trailer etc, an admin molle pouch with all my small tools to fix things on the vehicle off road like stems and stem valves, tire plugs, batteries for flash lights, etc in the pic, pouch for straps, d rings. Then I took my first aid kit and sewed some molle straps on the back and added that to the panel as well. I used a casserole dish bag for my first aid under the back seat bc it was thin enough to fit and it was big, now it fits behind the seat okay as well with the sewed on straps to mount it to the molle panel. I zip tied on some tire irons, and my breaker bar. I've been trying to take all the things I use off road, on my trailers, at camp, and use often, then put them away so they're not in my way unless I need them - it's giving me a lot of room underneath the seat to add other stuff I want, like a rain jacket for sudden down pours, shoes and socks for places (like the range) when I'm wearing sandals and forget shoes, ratchet set, 40 ft long strap.I also put my jack and the mount under the back seat against the back wall, so I could use the space under the passenger seat for my on board air, see the post in newbie guide to Cummins for that upgrade.

    Here is the panel:
    RAPDOM Tactical M.O.L.L.E. Panel, Black, 24" x 32" https://www.amazon.com/dp/B01F42XK6Y..._l.y5CbYXXFQ08

    GI stores have cheap used molle pouches

    https://uploads.tapatalk-cdn.com/201...ae202afae6.jpghttps://uploads.tapatalk-cdn.com/201...eed7435769.jpghttps://uploads.tapatalk-cdn.com/201...02146e6dd3.jpghttps://uploads.tapatalk-cdn.com/201...48ace6c3b0.jpghttps://uploads.tapatalk-cdn.com/201...ae2d71a035.jpghttps://uploads.tapatalk-cdn.com/201...bfaa64ac1a.jpghttps://uploads.tapatalk-cdn.com/201...1b14b9f5cd.jpghttps://uploads.tapatalk-cdn.com/201...433061c158.jpg

    Sent from my phone using Tapatalk
    Wow!!
    I like how everything is within reach and very organized! I use and have containers in every possible area under and behind the seats and it drives me batty when going around a corner a lil faster than I should and I can hear the containers sliding around I like your set up so much better
    Always looking forward to your awesome posts/threads!!
    Great job



    "Cumminsbadgirl"
    2014 Laramie MC 3500 ( Aisin ) 4X4
    MM3 Tuned by Double R Diesel


    2014 CUMMINS "BADGIRL" Laramie MC 3500 (Aisin) 4X4 MM3 Tuned by Double R Diesel *** EGR delete AFE CAI 4” FLO-PRO w/muffler 4" Zone lift, Federal Couragia 37’s with Black Rhinos,bed carpet kit, tail-gate assist, Retrax tunnau cover

    Previous "Cummins Badgirls" :
    2006 Cummins 2500 4x4
    2012 Cummins 2500 4x4

  8. Likes watersupply189, walla2k5 liked this post
  9. Top Of Page | #1126
    Clutch's Avatar

    User Info Menu

    Wow, very nice setup. Looks for you're prepared for anything.


  10. Top Of Page | #1127
    walla2k5's Avatar

    User Info Menu

    Quote Originally Posted by Stewbuntu View Post
    I first added a molle panel to the back of the passenger seat, but when my parents visited I had to move the panel to have more room in the back seat for a road trip to key west. So I moved the panel behind the back seat. Today I added a few more things to my molle panels behind the back seat. After doing the mod for the back seat to hinge forward I added some molle panels by cutting a wrapdom brand 24x32 molle panel in half. After cutting it I melted the cut end and hung that edge down so I could use the rivets to mount the panels behind the seat. You will need to remove the thin grey foam panel that covers the wall behind the back seat. I got some cheap molle pouches for things like my winch controller, zipties, rope, locks for the trailer etc, an admin molle pouch with all my small tools to fix things on the vehicle off road like stems and stem valves, tire plugs, batteries for flash lights, etc in the pic, pouch for straps, d rings. Then I took my first aid kit and sewed some molle straps on the back and added that to the panel as well. I used a casserole dish bag for my first aid under the back seat bc it was thin enough to fit and it was big, now it fits behind the seat okay as well with the sewed on straps to mount it to the molle panel. I zip tied on some tire irons, and my breaker bar. I've been trying to take all the things I use off road, on my trailers, at camp, and use often, then put them away so they're not in my way unless I need them - it's giving me a lot of room underneath the seat to add other stuff I want, like a rain jacket for sudden down pours, shoes and socks for places (like the range) when I'm wearing sandals and forget shoes, ratchet set, 40 ft long strap.I also put my jack and the mount under the back seat against the back wall, so I could use the space under the passenger seat for my on board air, see the post in newbie guide to Cummins for that upgrade.

    Here is the panel:
    RAPDOM Tactical M.O.L.L.E. Panel, Black, 24" x 32" https://www.amazon.com/dp/B01F42XK6Y..._l.y5CbYXXFQ08

    GI stores have cheap used molle pouches

    https://uploads.tapatalk-cdn.com/201...ae202afae6.jpghttps://uploads.tapatalk-cdn.com/201...eed7435769.jpghttps://uploads.tapatalk-cdn.com/201...02146e6dd3.jpghttps://uploads.tapatalk-cdn.com/201...48ace6c3b0.jpghttps://uploads.tapatalk-cdn.com/201...ae2d71a035.jpghttps://uploads.tapatalk-cdn.com/201...bfaa64ac1a.jpghttps://uploads.tapatalk-cdn.com/201...1b14b9f5cd.jpghttps://uploads.tapatalk-cdn.com/201...433061c158.jpg

    Sent from my phone using Tapatalk
    Wow, looks great. Didn't know you could fold the rear seat forward like that.

    2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm

  11. Likes watersupply189, cumminsbadgirl liked this post
  12. Top Of Page | #1128
    Stewbuntu's Avatar

    User Info Menu

    Quote Originally Posted by walla2k5 View Post
    Wow, looks great. Didn't know you could fold the rear seat forward like that.
    It's a mod, you trim the back brakets at the edge of the bottom of the plastic nub. Took me 30 min. to an hr. I think I used a hand hack saw so nothing burned or melted and metal didn't get everywhere. I used tin foil under the hook I was cutting to get all the shavings. Maybe just point the grinder out the door on both sides. This guy's has a good video on it, but he leaves the back foam inserts and cut a hole for his AR15. Note: you could mount basically anything that will fit once you go as far as adding molle panels. I also have an '12 with a single back seat so if you have a 60/40 split you can do both sides also. Oh, I also don't have to slam or pull hard on my seat like in the first video, it's butter smooth. I don't think he actually has to do that.





    My cut that works fine.





    What I wrote for the second video before I saw the first video which is way better:

    White nub = the part that surrounds the hook on the seat located about 3/4" up on the seat hook.

    If you jump to 11:24, then it skips 11 minutes of talking and testing and he shows how it works and before and after etc. I kept 100% of all the plastic white "nub". This guy grinds off a little more of the plastic above that wrap around portion aka nub

    Don't do the mod to raise your seat, this hook cut off mod is very oem looking when you go to sell it or get in a wreck vs only having a couple threads holding your seat down.

    I searched "Cummins back seat mod"





    Sent from my phone using Tapatalk

    2012 2500 ST w/ manmual 4x4 from the auction w 16k miles - Upgrades so far - Leather, LED bed lights, HID projectors, Nav = Appradio3 w ARU unchained reloaded full touch screencast & tailgate handle backup camera, homemade front hitch and reciever w 12k lb winch, reverse lights, soft open tailgate, transfercase linkage mod, Ultra and deletes, folding back seat mod, Kicker hideaway under drivers seat, Fumoto valve and safety clip, new warrantied turbo at 16k. Rocker Aux panel switches, Ford fold away bed extender, inverter outlet mod, soon an overhead console. Pulling a 2001 Prokat 2200WA around on my days off.

  13. Thanks watersupply189, walla2k5, cumminsbadgirl thanked for this post
  14. Top Of Page | #1129
    TexNeck's Avatar

    User Info Menu

    heres my next mod- not nice and neat like yours but clipping the hooks! Thanks for sharing! Way better than the spacers IMO

    2013 Ram 2500
    John 3:16 - Philippians 4:13

    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email me at:
    mike@ddpmotorsports.com
    www.ddpmotorsports.com



  15. Top Of Page | #1130
    Steve191145's Avatar

    User Info Menu

    First mod on the new truck LOL. Next up in linex and maybe a grill guard.

    Attached Images Attached Images

  16. Thanks watersupply189, cumminsbadgirl thanked for this post
Page 113 of 148 FirstFirst ... 1363103111112113114115123 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •