Probably wouldn’t be a bad idea
2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....
Probably wouldn’t be a bad idea
2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
Coolant flush today at 127k on my 2011.
Went ahead and did some preventive maintenance as well by replacing the water pump, tensioner, serpentine belt, upper and lower radiator hoses, radiator cap, coolant filter and lastly put in a 190 degree t-stat.
Should be good for another 127k.
Sent from my SM-N960U using Tapatalk
I first added a molle panel to the back of the passenger seat, but when my parents visited I had to move the panel to have more room in the back seat for a road trip to key west. So I moved the panel behind the back seat. Today I added a few more things to my molle panels behind the back seat. After doing the mod for the back seat to hinge forward I added some molle panels by cutting a wrapdom brand 24x32 molle panel in half. After cutting it I melted the cut end and hung that edge down so I could use the rivets to mount the panels behind the seat. You will need to remove the thin grey foam panel that covers the wall behind the back seat. I got some cheap molle pouches for things like my winch controller, zipties, rope, locks for the trailer etc, an admin molle pouch with all my small tools to fix things on the vehicle off road like stems and stem valves, tire plugs, batteries for flash lights, etc in the pic, pouch for straps, d rings. Then I took my first aid kit and sewed some molle straps on the back and added that to the panel as well. I used a casserole dish bag for my first aid under the back seat bc it was thin enough to fit and it was big, now it fits behind the seat okay as well with the sewed on straps to mount it to the molle panel. I zip tied on some tire irons, and my breaker bar. I've been trying to take all the things I use off road, on my trailers, at camp, and use often, then put them away so they're not in my way unless I need them - it's giving me a lot of room underneath the seat to add other stuff I want, like a rain jacket for sudden down pours, shoes and socks for places (like the range) when I'm wearing sandals and forget shoes, ratchet set, 40 ft long strap.I also put my jack and the mount under the back seat against the back wall, so I could use the space under the passenger seat for my on board air, see the post in newbie guide to Cummins for that upgrade.
Here is the panel:
RAPDOM Tactical M.O.L.L.E. Panel, Black, 24" x 32" https://www.amazon.com/dp/B01F42XK6Y..._l.y5CbYXXFQ08
GI stores have cheap used molle pouches
Sent from my phone using Tapatalk
2012 2500 ST w/ manmual 4x4 from the auction w 16k miles - Upgrades so far - Leather, LED bed lights, HID projectors, Nav = Appradio3 w ARU unchained reloaded full touch screencast & tailgate handle backup camera, homemade front hitch and reciever w 12k lb winch, reverse lights, soft open tailgate, transfercase linkage mod, Ultra and deletes, folding back seat mod, Kicker hideaway under drivers seat, Fumoto valve and safety clip, new warrantied turbo at 16k. Rocker Aux panel switches, Ford fold away bed extender, inverter outlet mod, soon an overhead console. Pulling a 2001 Prokat 2200WA around on my days off.
Nice setup!!
2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
Wow!!
I like how everything is within reach and very organized! I use and have containers in every possible area under and behind the seats and it drives me batty when going around a corner a lil faster than I should and I can hear the containers sliding around I like your set up so much better
Always looking forward to your awesome posts/threads!!
Great job
"Cumminsbadgirl"
2014 Laramie MC 3500 ( Aisin ) 4X4
MM3 Tuned by Double R Diesel
2014 CUMMINS "BADGIRL" Laramie MC 3500 (Aisin) 4X4 MM3 Tuned by Double R Diesel *** EGR delete AFE CAI 4” FLO-PRO w/muffler 4" Zone lift, Federal Couragia 37’s with Black Rhinos,bed carpet kit, tail-gate assist, Retrax tunnau cover
Previous "Cummins Badgirls" :
2006 Cummins 2500 4x4
2012 Cummins 2500 4x4
Wow, very nice setup. Looks for you're prepared for anything.
Wow, looks great. Didn't know you could fold the rear seat forward like that.
2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm
It's a mod, you trim the back brakets at the edge of the bottom of the plastic nub. Took me 30 min. to an hr. I think I used a hand hack saw so nothing burned or melted and metal didn't get everywhere. I used tin foil under the hook I was cutting to get all the shavings. Maybe just point the grinder out the door on both sides. This guy's has a good video on it, but he leaves the back foam inserts and cut a hole for his AR15. Note: you could mount basically anything that will fit once you go as far as adding molle panels. I also have an '12 with a single back seat so if you have a 60/40 split you can do both sides also. Oh, I also don't have to slam or pull hard on my seat like in the first video, it's butter smooth. I don't think he actually has to do that.
My cut that works fine.
What I wrote for the second video before I saw the first video which is way better:
White nub = the part that surrounds the hook on the seat located about 3/4" up on the seat hook.
If you jump to 11:24, then it skips 11 minutes of talking and testing and he shows how it works and before and after etc. I kept 100% of all the plastic white "nub". This guy grinds off a little more of the plastic above that wrap around portion aka nub
Don't do the mod to raise your seat, this hook cut off mod is very oem looking when you go to sell it or get in a wreck vs only having a couple threads holding your seat down.
I searched "Cummins back seat mod"
Sent from my phone using Tapatalk
2012 2500 ST w/ manmual 4x4 from the auction w 16k miles - Upgrades so far - Leather, LED bed lights, HID projectors, Nav = Appradio3 w ARU unchained reloaded full touch screencast & tailgate handle backup camera, homemade front hitch and reciever w 12k lb winch, reverse lights, soft open tailgate, transfercase linkage mod, Ultra and deletes, folding back seat mod, Kicker hideaway under drivers seat, Fumoto valve and safety clip, new warrantied turbo at 16k. Rocker Aux panel switches, Ford fold away bed extender, inverter outlet mod, soon an overhead console. Pulling a 2001 Prokat 2200WA around on my days off.
heres my next mod- not nice and neat like yours but clipping the hooks! Thanks for sharing! Way better than the spacers IMO
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
First mod on the new truck LOL. Next up in linex and maybe a grill guard.
Bookmarks