I haven't had any experience with it to compare.
Hopefully, others will chime in.
I recommend a tablet-style scan tool with a CAN bus topology, such as the Autel, Thinktool Pro, or Topdon.
I haven't had any experience with it to compare.
Hopefully, others will chime in.
I recommend a tablet-style scan tool with a CAN bus topology, such as the Autel, Thinktool Pro, or Topdon.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
I'm getting code U1601- ECU application software CPDE 1 missing or corrupted, U0101-TIPM lost communication with TCM, U0100-TIPM lost communication with ECM/PCM, U0141-WCM lost communication with IPM (FCM/TUPM), 3 different open circuits in TIPM.
OBD2 scanner was able to read and clear codes!
Sounds like the TIPM, do the codes return, can you communicate with any other modules?
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
Sorry, I meant the scanner can clear codes as a function!
Those codes come back, but others from disconnecting the battery cleared and didn't return.
I can read codes from ABS and SRS, and it says my TCM doesn't support the reading DTC function.
I am not sure if that's the cause of the scanner.
Yes, I don’t know either.
It’s a tough call, and you may have multiple problems.
The codes show lost communications with the TCM, ECM & IPM, but you can communicate with the ABS & SRS.
Last edited by AK Bob; 05-28-2024 at 11:05 PM.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
Bookmarks