Abnormally Rough Downshifting 68RFE?

[bigboost]

I just wanted to gauge people's opinions on this.

My 2022 downshifting coming to a stop is rough.

It is exacerbated by the exhaust brake being on.

To the point that I wouldn't say I like using the EB anymore, or I have to constantly turn it on and off when I get close to a stop to keep it from knocking my teeth out.

I know it's an HD transmission, tuned, and overall, it's not the most excellent transmission, but it's so rough that non-car-oriented passengers even pick up on how rough it downshifts.

The truck is still under warranty, and the dealership service center is weight-loss friendly, so I've been considering taking it in.

Is there anything on the MM3 I can log/view to see if something is wrong?

I've been considering a Valve Body but don't want to throw parts at an unknown problem.

What are your guy's thoughts?

TIA.

 0 Comment(s)

[IGOTACUMMINS]

Have you tried to reprogram and let the trans relearn again?

We have a few people with issues with the 2022 trucks, which are all over the place.

igotacummins

 0 Comment(s)

[bigboost]

Have you tried to reprogram and let the trans relearn again?

We have a few people with issues with the 2022 trucks, which are all over the place.

igotacummins

I'm fairly inexperienced; I thought I just did a re-learn when doing the weight loss.

I could try it again.

I assume something is wrong because it drove the same pre and post-weight loss.

I am open to suggestions if you think it's worth a try.

 0 Comment(s)

[IGOTACUMMINS]

Something doesn't sound right or programmed correctly.

Can you reprogram the truck again to make sure it's programmed?

igotacummins

 0 Comment(s)

[bigboost]

Something doesn't sound right or programmed correctly.

Can you reprogram the truck again to make sure it's programmed?

igotacummins

Yes, sir, I'll give that a try this afternoon.

Just to clarify, just re-program the truck with the file?

 0 Comment(s)

[IGOTACUMMINS]

Yes, sir, I'll give that a try this afternoon.

Just to clarify, just re-program the truck with the file?

Yes, sir.

Sent from my SM-S928U1 using Tapatalk

 0 Comment(s)

[watersupply189]

Also, when you reprogram, make sure your truck is on a charger to prevent it from dropping below 12.6V.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)