I just put one of these on my '19 RAM 3500 HO.

https://sdhqoffroad.com/products/19-...r&_ss=e&_v=1.0

The installation was pretty straightforward and only took an hour or so.

The build quality is excellent.

The only problem I had was one of the bolts galled in the crossmember frame when I did the test fit.

I was able to back it out without damaging the threads.

I did have to get a new bolt.

I recommend chasing all the threads with a tap in case any powder coating gets inside.

Also, take it easy on the revenues.

I over-torqued one and had to drill it out. Fortunately, I had 1/4-20 rivnuts on hand.

It looks good, and I was able to get rid of the black plastic cowling under the front bumper. It can be used as a jack point as well, which is nice to have.

Sent from my SM-G965U using Tapatalk