If I ONLY have a single tune (30hp), do the switch functions (0-5) on the MM3 even have a function?
The reason I ask is If one of those switch positions gets selected, would it change anything?
I was wondering if the ECM should now be reflashed.
If I ONLY have a single tune (30hp), do the switch functions (0-5) on the MM3 even have a function?
The reason I ask is If one of those switch positions gets selected, would it change anything?
I was wondering if the ECM should now be reflashed.
You'll likely have a stock option 0 or 1, which will be your 30hp mode.
The others have no functions until you buy the additional tunes for the power tabs.
II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX, YUKON 4.56 GEARS W/ COVERS
Okay, thanks!
I just previously wrote the custom file into ECM and let her eat.
I assumed the switch positions didn’t have a function, and the ECM ran off the custom file.
The thought that I’ve potentially just been rolling around in “stock for the last 60k miles is funny.
I agree; my understanding is with a single tune programmed into the PCM, you will be in that tune regardless of the switch position or if you remove the MM3 completely.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
Bookmarks