Quote Originally Posted by EC sam View Post
I put a laser on my tires this weekend.

The result shows that the top of the tire is pushed out or vice versa.

However, the wheel does not wobble when turning.

Thoughts on that.
It seems impossible really but as somebody mentioned before checking a broken or stripped axle on the side that isn't lligning accurately.

If the axle were bent, the wheel would wobble.

If the axle was broken, then not only would the wheel, not center, but it could also cause a rear end to pull to the other tire when accelerating and pull back the opposite way when decelerating if the limited slip was doing the driving instead of letting it spin through.

Also, you should check the axle tube.

If the axle tube were bent, it could cause a similar situation with the front wheels straight.

Are the accurate center-to-center measurements the same on both sides of the axle tube?

It's a little more difficult to measure the other 2 axis, but the alignment shop should have it.

Sent from my SM-G715U1 using Tapatalk