Well, guys, I was off to Mexico, so I sent the screen out to mm3.
I had some issues with my old man's 21 outside Vegas.
I'm not sure where the Ihadacummins part of the forum is, but yeah.
Bone stock has no rhyme or reason or warning.
Anyway, back to the MM3, I got a replacement screen back and installed it worked great.
I tried to load the tune, and it errored out at labout12%, then errored out at about 6% while trying to recover the stock tune, it said.
Now it says it can't start programming the ECM.
The ECM is not an application mode.
I spoke with MM3, and per their recommendation, I disconnected the batteries as instructed.
I reconnected and added a charger.
When I go into the ECM menu, it loads the screen and says to turn it on, but it messes up.
If I unplug the OBD and reconnect, it switches back to the ECM, which is not in application mode.
MM3 says they can get me a recovery file, but it comes out of Italy so that it couldn't have happened yesterday, so hopefully, today.
I'm hoping that the recovery file that was discussed will fix the issue.
Bookmarks