Hi, I'm looking for the torque values on the grid heater, delete plate reinstall, and the fuel line lines.
Thank you.
Hi, I'm looking for the torque values on the grid heater, delete plate reinstall, and the fuel line lines.
Thank you.
Last edited by olyeller40; 01-23-2024 at 05:23 AM. Reason: Grid heater delete
See attached.
Your 2012 torque values will be the same.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
I used these instructions for my grid heater delete.
https://www.fleeceperformance.com/me...e_20160223.pdf
Give me a bit and I'll try to get OEM specs for the torque on the lines.
For the grid delete, I snugged them fairly tight, but didn't use any torque specs and have had zero issues since install.
I did the same for the fuel lines with a crow's foot.
Edit: Just noticed Bob has it covered.
Last edited by Corkey; 01-23-2024 at 07:54 PM.
II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX, YUKON 4.56 GEARS W/ COVERS
I appreciate your help.
Thanks for all the help.
Bookmarks