Hi, new member and new post: I'm building a 6.7L engine, and I'd like your opinions.
I hope the translation is appropriate.
Thank you.
Thanks: 14
Likes: 37
Hi, new member and new post: I'm building a 6.7L engine, and I'd like your opinions.
I hope the translation is appropriate.
Thank you.
Welcome to the family, bud!
Appears to be new valves but I see a bunch of metal-to-metal impacts from something.
II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX, YUKON 4.56 GEARS W/ COVERS
IGOTACUMMINS thanked for this post
Is it appropriate for me to use it, or has anyone had the same experience?
IGOTACUMMINS thanked for this post
Yes, the seat valve is broken.
IGOTACUMMINS thanked for this post
I would certainly figure out why that cylinder took a beating.
Why was the rebuild needed?
What's the back story on it?
II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX, YUKON 4.56 GEARS W/ COVERS
IGOTACUMMINS thanked for this post
Yes, there is a seat valve problem.
I installed the seat valve and valve but don't know if it will hold up.
IGOTACUMMINS thanked for this post
I recommend having a machine shop inspect the head for cracks and flatness, then resurface.Originally Posted by Bakhit
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
https://www.fleeceperformance.com/me...dValveLash.pdf
This whole procedure is pretty nice.
Have you done page 5 of the 5 steps?
II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX, YUKON 4.56 GEARS W/ COVERS
IGOTACUMMINS thanked for this post
Welcome!
As stated, I would get a machine shop to inspect it.
2016 Ram Laramie 3500, G56, 6.7, CC, 4x4
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
IGOTACUMMINS thanked for this post
He says, I don't know, but I will try it.
IGOTACUMMINS thanked for this post
Posting Permissions
Register To Reply
Bookmarks