My exhaust brake has been making unusual sounds (high-pitched, squealing) for the past month.
Then, this past week, my turbo has started replicating the same noise when spooling up.
Not sure what to think of it
My exhaust brake has been making unusual sounds (high-pitched, squealing) for the past month.
Then, this past week, my turbo has started replicating the same noise when spooling up.
Not sure what to think of it
'08 | G56 | Carli 3" | Carli Axle Truss | BDS Adjustable Traction Bars | BDS Steering Brace | Red-head Gearbox | Synergy HD Steering | Banks Cold Air Intake | Banks Intake Manifold | Steedspeed Exhaust Manifold | Grid Heater Delete | Fleece Cheetah Turbo | Fleece Fuel Filter Delete | Fass 165gph System | Fass Fuel Heater Disc | Fass Fuel Sump | EFI Live | Fuel Revolver Wheels | 35" BFG All-Terrains
You may want to get a scan tool and monitor the actual vs desired for the vane position.
How many miles are on the rig?
Sounds like the vanes are starting to stick on you.
II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX, YUKON 4.56 GEARS W/ COVERS
Have you ruled out any possible gasket leaks?
I had an exhaust manifold gasket leak and a turbo gasket leak.
It's amazing how squeaky those can be.
Typically, you can see the black soot where the leak is.
Well, the truck has 250k, but the turbo is fairly new, a little under 3 years old.
I wouldn't be surprised about the vanes, tho.
'08 | G56 | Carli 3" | Carli Axle Truss | BDS Adjustable Traction Bars | BDS Steering Brace | Red-head Gearbox | Synergy HD Steering | Banks Cold Air Intake | Banks Intake Manifold | Steedspeed Exhaust Manifold | Grid Heater Delete | Fleece Cheetah Turbo | Fleece Fuel Filter Delete | Fass 165gph System | Fass Fuel Heater Disc | Fass Fuel Sump | EFI Live | Fuel Revolver Wheels | 35" BFG All-Terrains
There is a small chance the downpipe clamp has worked its way loose, or you blew out the downpipe gasket.
You'll get squealing if either of these happens, especially when the exhaust brake kicks on.
What turbo did you put in it?
2018 Ram 2500 4x4 G56
Romans 10:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
joe@ddpmotorsports.com
www.ddpmotorsports.com
Fleece Cheetah.
'08 | G56 | Carli 3" | Carli Axle Truss | BDS Adjustable Traction Bars | BDS Steering Brace | Red-head Gearbox | Synergy HD Steering | Banks Cold Air Intake | Banks Intake Manifold | Steedspeed Exhaust Manifold | Grid Heater Delete | Fleece Cheetah Turbo | Fleece Fuel Filter Delete | Fass 165gph System | Fass Fuel Heater Disc | Fass Fuel Sump | EFI Live | Fuel Revolver Wheels | 35" BFG All-Terrains
Fleece Cheetah.
Has anyone else had issues with them?
I have only heard rumors and side talk of them not liking heavy towing, but this sounds different.
19 Ram 2500 Longhorn Laramie S&B intake, BMP CAT filter kit, FRANTZ Bypass system, Pedal Monster
The MLS exhaust gaskets make a hell of an ear-piercing squeal when they are leaking, especially when using the be.
I fought it constantly with mine, even using stainless stud kits, then used brass nuts, and finally gave up and tightened them when I heard a squeal.
Check all six exhaust ports, manifold to the turbo, and EGR plates; I’d guess you have something loose.
2013 2500 tradesman ccsb leveled 35’s 20x10 Tis 544’s 167k miles Raceme ultra with custom tuning, gutted factory intake, stainless intake ram, grid heater delete, exotic head studs, ddp 90hp injectors, II CP3, bmp 150gph lift pump,stock air, 5” turbo back with 8” tip, custom rear bumper, trifold bed cover, bd separator plate and sonnex shift kit in trans
I concur with some of the other posts above.
Check your exhaust manifold gaskets.
Mine started leaking nottwo2 months after a new turbo and exhaust install.
A high-pitched squeal from hell was more noticeable when EB was activated.
Hindsight is always 20/20, but if I had it to do over again, I'd do the exhaust manifold gasket when I did the original turbo work.
It was an exhaust gasket leak.
Thanks for the input, fellas.
'08 | G56 | Carli 3" | Carli Axle Truss | BDS Adjustable Traction Bars | BDS Steering Brace | Red-head Gearbox | Synergy HD Steering | Banks Cold Air Intake | Banks Intake Manifold | Steedspeed Exhaust Manifold | Grid Heater Delete | Fleece Cheetah Turbo | Fleece Fuel Filter Delete | Fass 165gph System | Fass Fuel Heater Disc | Fass Fuel Sump | EFI Live | Fuel Revolver Wheels | 35" BFG All-Terrains
Bookmarks