MM3 Tuner Won't Recognize TPMS?

[1badcobra]

I installed a DRD MM3 tuner in August on my 2016 Ram 2500.

I had my aftermarket rims and tires on it when the tune was installed.

Yesterday, I swapped out the wheels to put my stocks back on for some road trips.

My truck will not recognize my stock sensors. It's still showing the air pressures from the aftermarket wheels on the dash.

The pressures won't change.

Any ideas what I need to do?

I appreciate any help you can provide.

Sent from my SM-G973U using Tapatalk

 0 Comment(s)

[AK Bob]

I installed a DRD MM3 tuner in August on my 2016 Ram 2500.

I had my aftermarket rims and tires on it when the tune was installed.

Yesterday, I swapped out the wheels to put my stocks back on for some road trips.

My truck will not recognize my stock sensors. It's still showing the air pressures from the aftermarket wheels on the dash.

The pressures won't change.

Any ideas what I need to do?

I appreciate any help you can provide.

Sent from my SM-G973U using Tapatalk

The TPMS module should automatically learn the sensors; see the operation description attached.

If it doesn’t automatically detect them, each sensor must be forced to transmit with a capable scan tool or similar, like the Autel TS601.

 0 Comment(s)

[watersupply189]

I installed a DRD MM3 tuner in August on my 2016 Ram 2500.

I had my aftermarket rims and tires on it when the tune was installed.

Yesterday, I swapped out the wheels to put my stocks back on for some road trips.

My truck will not recognize my stock sensors. It's still showing the air pressures from the aftermarket wheels on the dash.

The pressures won't change.

Any ideas what I need to do?

I appreciate any help you can provide.

Sent from my SM-G973U using Tapatalk

Have you manually checked the air pressure?

Maybe they are the same pressure as the aftermarkets you took off?


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[1badcobra]

The TPMS module should automatically learn the sensors; see the operation description attached.

If it doesn’t automatically detect them, each sensor must be forced to transmit with a capable scan to or similar, like the Autel TS601.

The attachment wouldn't open, but I will look it up.

If that doesn't work, I have access to a Snap-on scan tool and see if that works. I appreciate that info.

Sent from my SM-G973U using Tapatalk

 0 Comment(s)

[1badcobra]

Have you manually checked the air pressure?

Maybe they are the same pressure as the aftermarkets you took off?

2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

Yes, I have checked the air.

That's actually how I discovered the problem.

I filled the tires to 60 before installing the stocks.

My aftermarket wheels were at 50.

Sent from my SM-G973U using Tapatalk

 0 Comment(s)

[AK Bob]

The attachment wouldn't open, but I will look it up.

If that doesn't work, I have access to a Snap-on scan tool and see if that works.

I appreciate that info.

Sent from my SM-G973U using Tapatalk

I tested the attachment, and it worked fine on my end.

You could try accessing the forum from a computer, maybe an Android issue.

 0 Comment(s)

[1badcobra]

I tested the attachment, and it worked fine on my end.

You could try accessing the forum from a computer, maybe an Android issue.

That's probably the problem because I'm on my Android.

Sent from my SM-G973U using Tapatalk

 0 Comment(s)