14 RAM 2500 - ABS/Traction Control Activating?

[jgruberman]

Is there any way to identify which side is going bad when it only happens when the wheel is turned to the left?

I ordered a scanner on Amazon, but it won't be here until later today, and I'm hoping to get it fixed sooner than later.

Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[watersupply189]

It could be a caliper is sticking, causing your truck to pull to the left.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[jgruberman]

It could be a caliper is sticking, causing your truck to pull to the left.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

The traction control light is coming on, and the pedal is pulsing.

There is no pulling when driving straight; it only happens when I actively turn my wheel to the left.

I could be turning 90° to the right, but when I turn my wheel back towards the left to bring my truck straight, it will happen as well.

Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[AK Bob]

The traction control light is coming on, and the pedal is pulsing.

There is no pulling when driving straight; it only happens when I actively turn my wheel to the left.

I could be turning 90° to the right, but when I turn my wheel back towards the left to bring my truck straight, it will happen as well.

Sent from my SM-S908U using Tapatalk

Just to rule out any other mechanical issues try removing the ABS fuse to see if the problem goes away.

I was just trying to isolate the issue to the ABS system.

 0 Comment(s)

[jgruberman]

Just to rule out any other mechanical issues try removing the ABS fuse to see if the problem goes away.

I was just trying to isolate the issue to the ABS system.

Removing that fuse will it prevent the issue from happening if the wheel speed sensor is in fact triggering it?

Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[jgruberman]

I pulled the "ABS/BSM ECU/VALVES" fuse. (F26)

There's also an "ABS PUMP MTR" (F06) but I think the former should cover what I need?

Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[jgruberman]

I pulled the "ABS/BSM ECU/VALVES" fuse. (F26)

There's also an "ABS PUMP MTR" (F06) but I think the former should cover what I need?

Sent from my SM-S908U using Tapatalk

After pulling that fuse, I do not have the problem anymore with the pedal pulsating when the wheel turns to the left.

I'm about to get on the freeway right now but the problem would have already happened by now because I've been intentionally making hard left turns while braking.

Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[AK Bob]

By removing that fuse, will it prevent the issue from happening if it is in fact being triggered by the wheel speed sensor?

Sent from my SM-S908U using Tapatalk

The wheel speed sensors are inputs to the ABS module.

I am thinking if you can take the ABS module out of service by pulling the fuse you can narrow down the issue to the ABS system and possibility rule out other mechanical causes like sticking calipers.

 0 Comment(s)

[jgruberman]

The wheel speed sensors are inputs to the ABS module.

I am thinking if you can take the ABS module out of service by pulling the fuse you can narrow down the issue to the ABS system and possibility rule out other mechanical causes like sticking calipers.

I just slowed down coming to a red light and was braking and turned the wheel hard left and right back and forth and did not have the problem.

The issue is no longer occurring with removal of that fuse.

Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[AK Bob]

I just slowed down coming to a red light and was braking and turned the wheel hard left and right back and forth and did not have the problem.

The issue is no longer occurring with removal of that fuse.

Sent from my SM-S908U using Tapatalk

At this point you have ruled out any other mechanical issues and narrowed it down to the ABS system.

Could be a problem with the one of the wheel speed sensors.

When you get your new scanner do a full system scan to see what trouble codes are present.

 0 Comment(s)