2019 RAM 2500 ATS Allison Swap - EZ Lynk Tuning Wanted

[Desertech]

As stated above, I have a 2019 2500, and I'm about to do the ATS Allison swap and need to find a new tuning company since CTT is nowhere to be found.

I don't want to switch from EZ Lynk, and I need new SOTF tunes and an Aisin trans tune.

Who is the best out there right now?

Thanks for any help!

 0 Comment(s)

[watersupply189]

Unfortunately, an Aisin can not be tuned.

I hope you can find someone that can tune the EZ Lynk.

Have you looked at what DRD has to offer with the MM3?


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[Desertech]

I needed to clarify better.

I need the truck to think an Aisin is under it instead of the 68RFE that was.

I don't need the trans to be tuned, and the ATS translator must have an Aisin-based language or whatever you want to call it.

 0 Comment(s)

[watersupply189]

@Akbob, do you have any info on this since you also have an Aisin?


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[AK Bob]

@Akbob, do you have any info on this since you also have an Aisin?


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

As stated above, I have a 2019 2500, and I'm about to do the ATS Allison swap and need to find a new tuning company since CTT is nowhere to be found.

I don't want to switch from EZ Lynk, and I need new SOTF tunes and an Aisin trans tune.

Who is the best out there right now?

Thanks for any help!

If you plan on staying with the EZ Lynk platform, you may want to look into Calibrated Power to see what they offer.

https://duramaxtuner.com/catalogsear...ult/?q=EZLynk+

The Aisin-equipped trucks have a separate transmission control module from the ECM.

 0 Comment(s)

[Jeffwhip]

I wanted to revive this thread.

I am in the process of acquiring a Dodge Mega Cab and am trying to figure out what year to buy.

I intend to buy a truck and swap the transmission with an Allison transmission from ATS.

If I were to buy a 3500 and remove the Aisin tranny, since the truck “thinks” it has an Aisin, which programmer would I need to handle this?

Desertech, what did you end up doing?

 0 Comment(s)

[sootmaster]

Hello,
I have been dealing with the ATS conversion. Worked AMANINGLY!! BTW, I did the First version with company Destroked with plates and ALLISON external module and harness had to REPROG factory ECU for a Std trans for it to work, but lost some key features being Std Trans program.
If you pick Any newer Ram with the Aisin All you need is for tuner NORTH of the Boarder to tune your multiple tune switch. Weather you due a weight loss of not.

If still can find a Ram factory Aisin ECU program nothing other then the ATS translator for EPA compliancy. But open source software to adjust the ALLISON external module at your own risk.

YOU Reilly NEED follow ATS Recommendations as they Pioneered this upgrade. One other Member here has Multiple truck's with ATS conversions and will only do future mods as they feel better then 68RFE. Put Allison in the search and read this member's story:

https://www.igotacummins.com/threads...hlight=allison

Most any Northern tuner can supply Aisin to your factory ECU(dirty diesel) Tuner is Up to you as which one will do your task and options you like, I am presently doing EFI Live But that is due to MY extreme mods and HP goal going forward.

I have been saving for the DANA complete Axles assembles with what ever gears ratio and option's and brakes complete and then just lift to the sky!!

Hope helps your project.

 0 Comment(s)