Thanks: 31
Likes: 79
Hey there, I believe I just uploaded the tunes.
I was able to see where I could switch them.
I turned the truck on, and now the MM3 is five times.
Red, red, green, red, red.
What do I do concerning that, and can I now do the mechanical work?
Sent from my iPhone using Tapatalk
The MM3 should be on and displaying without a flash code unless I'm missing something.
Sent from my SM-G973U using Tapatalk
I unplugged it from the port, plugged it back in, and now it’s on.
I should be good to do mechanical work now.
Sent from my iPhone using Tapatalk
IGOTACUMMINS thanked for this post
Assuming the truck starts and runs without issue after uploading tunes, then yes.Originally Posted by Roadrunner6.7
Sent from my SM-G973U using Tapatalk
IGOTACUMMINS thanked for this post
Is the > RTO: <boot/RT?> normal to see?
Sent from my iPhone using Tapatalk
IGOTACUMMINS thanked for this post
I started the truck, and it ran, but then the MM3 flashed back into the red/green light.
Unplugged while the truck was on and plugged in again.
While the truck is running, this is what is being shown.
Sent from my iPhone using Tapatalk
IGOTACUMMINS thanked for this post
That is exactly what mine shows, and I do not have sound tunes.
Sent from my iPhone using Tapatalk
2017 RAM 2500 CTD Blue Streak CCSB | 2.5" Leveling Springs, Toyo AT/III 295/70/R18, DRD MM3
IGOTACUMMINS thanked for this post
So this is what it’s supposed to look like normally?
I don’t want to get under the hood until I know everything is ok with this.
Sent from my iPhone using Tapatalk
IGOTACUMMINS thanked for this post
That's right, but the red-green isn't, I don't believe.
@DRD
Sent from my SM-G973U using Tapatalk
I’m wondering what that can be.
This is my first time doing this.
I took the truck yesterday to get the batteries tested.
Everything was good on that end.
Sent from my iPhone using Tapatalk
Posting Permissions
Register To Reply
Bookmarks