Drag Link Replacement?

[Chrisn162001]

I will have to check if there is a track bar drop bracket.

I assume I must remove it and get the truck realigned if there is.

Sent from my SM-S908U using Tapatalk

There’s a track bar drop bracket in the picture you posted.

You will need a longer track bar if you take that bracket off.


Sent from my iPhone using Tapatalk

 0 Comment(s)

[jgruberman]

There’s a track bar drop bracket in the picture you posted.

You will need a longer track bar if you take that bracket off.


Sent from my iPhone using Tapatalk

I believe this track bar is adjustable, would that work?

Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[jgruberman]

Sorry, I forgot to include a pic.



Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[jgruberman]

Pretty sure this is what I have on the front: https://www.roughcountry.com/forged-...bar-31004.html

Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[jgruberman]

Sorry for the multiple posts, but I keep getting ideas.

Can I remove the track bar drop bracket and adjust the track bar to fit the position as the truck currently sits when I remove it?

Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[Chrisn162001]

Sorry for the multiple posts, but I keep getting ideas.

Can I remove the track bar drop bracket and adjust the track bar to fit the position as the truck currently sits when I remove it?

Sent from my SM-S908U using Tapatalk

Should be able too as long as it’s long enough for your lift.


Sent from my iPhone using Tapatalk

 0 Comment(s)

[jgruberman]

Should be able too as long as it’s long enough for your lift.


Sent from my iPhone using Tapatalk

I'm pretty sure that this is a 4-in lift because certain suspension components underneath the truck have a 4 in measurement between the factory bolt and the new bolt. Plus I just don't think it's a 6-in lift with 35-in tires. That being the case, since the rough country bar says it's 0 to 5 in, I think I should be good to just remove it and plug in the new adjusted track bar? Here is a photo of the truck, since I bought it with the lift I never was able to identify the size.



Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[jgruberman]

This is my logic for a 4" lift.

Yay? Nay?





Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[Chrisn162001]

It looks identical to my old pro comp 4-inch lift when I had 35s.

I had problems with the track bar bracket coming loose.

I was planning on doing what you are currently doing but ended up swapping to Carli lift instead.


Sent from my iPhone using Tapatalk

 0 Comment(s)

[jgruberman]

It looks identical to my old pro comp 4-inch lift when I had 35s.

I had problems with the track bar bracket coming loose.

I was planning on doing what you are currently doing but ended up swapping to Carli lift instead.


Sent from my iPhone using Tapatalk

Are you doing what I am currently doing, meaning swapping out the lift brackets for adjustable bars?

Sent from my SM-S908U using Tapatalk

 0 Comment(s)