FS: Fox 2.0 IFP Shocks

[5thgencummins1]

Carli tuned for 2014+ RAM 2500 rear stock height factory coils.

Fox 2.0 IFP shocks use an Internal Floating Piston(IFP) to separate the nitrogen from the shock fluid, resulting in better damping quality compared to an emulsion(Nitrogen and oil mixed) style shock.

The aluminum body helps dissipate heat. Rubber bushing ends.

These shocks were on the truck for 2 months.

They were removed because the rear stock height factory coils were replaced with Carli soft ride coils which required new shocks.

They were installed on a 2020 RAM 2500.

COST: $200+ shipping.

 0 Comment(s)

[watersupply189]

Are these just for the rear or a complete set front and back?

Do you know if these will fit on a 2016 3500 with a leveling kit?

Never mind, I reread for the rear.

Thanks

2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[5thgencummins1]

Are these just for the rear or a complete set front and back?

Do you know if these will fit on a 2016 3500 with a leveling kit?

Never mind, I reread for the rear.

Thanks

2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

These are just for the rear!

I had them on the truck for 2 months then decided to change out the factory coil springs for Carli Coil Springs.

I don’t believe these are tuned for a 3500 with Leaf Springs.

Just the 2500 with Coil Springs.

 0 Comment(s)

[watersupply189]

These are just for the rear!

I had them on the truck for 2 months then decided to change out the factory coil springs for Carli Coil Springs.

I don’t believe these are tuned for a 3500 with Leaf Springs.

Just the 2500 with Coil Springs.

Thanks.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[5thgencummins1]

SOLD!

Please close.

 0 Comment(s)