Thanks: 30
Likes: 57
Before replacing the accelerator pedal, follow the fault code diagnostic procedures in the service manual.
Make sure to check the wiring and connectors.
P2122 and P2127 will be set if the accelerator pedal connector is disconnected during diagnosis.
Make sure codes are active before replacing the pedal.
A two-footed driver usually causes DTC P2299, and the accelerator pedal should not be replaced for this fault.
II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX, YUKON 4.56 GEARS W/ COVERS
I disconnected my pedal commander to remove any other possibilities, and the issue remains.Originally Posted by Corkey
Good connections, but still no codes.
Sent from my iPhone using Tapatalk
IGOTACUMMINS thanked for this post
Posting Permissions
Register To Reply
Bookmarks