P0341 Camshaft Code Intermittent?

[watersupply189]

UPDATE:

Problem solved. (For now, knock on wood)

Pair of Delphi's went in.

Crank and engine RPM remained steady on the gauge, with no fluctuation.

Brief rip around the block, but no issues.

I intentionally left the fault code current and active.

It has now cleared by itself.

Medium cruise down the motorway at about 2000rpm, it remained constant.

Same with cruise at 1000rpm and at hellfire at 3000rpm (Tunnel run).

It seems that either the standard motor parts unit was faulty or replacing these sensors in matched pairs is a good idea.

On the plus side, I now have a Cummins UK parts account.

They wouldn't sell me new crank sensors, only reconditioned ones.

Thanks for the help and suggestions; they worked because I wouldn't have thought about the cam sensor.

Awesome, glad you got it fixed.

Yeah, it seems if one sensor is bad, it will throw other sensors into a tizzy.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[monkeh]

Spot on, much better.

Ignore the throttle position; it's the tune's aggressiveness.

 0 Comment(s)

[Corkey]

UPDATE:

Problem solved. (For now, knock on wood)

Pair of Delphi's went in.

Crank and engine RPM remained steady on the gauge, with no fluctuation.

Brief rip around the block, but no issues.

I intentionally left the fault code current and active.

It has now cleared by itself.

Medium cruise down the motorway at about 2000rpm, it remained constant.

Same with cruise at 1000rpm and at hellfire at 3000rpm (Tunnel run).

It seems that either the standard motor parts unit was faulty or replacing these sensors in matched pairs is a good idea.

On the plus side, I now have a Cummins UK parts account.

They wouldn't sell me new crank sensors, only reconditioned ones.

Thanks for the help and suggestions; they worked because I wouldn't have thought about the cam sensor.

I'm glad you figured it out and have your truck running as it should.

 0 Comment(s)