Amsoil Bypass Filter?

[olyeller40]

Hi, all.

I need some help.

I have an Amsoil bypass filter for my 2012 Cummins.

Where do you put the pressure line on the filter housing, and what does it take to complete?

Thanks.

 0 Comment(s)

[AK Bob]

On my 2014 I removed the 1/8” NP plug from the top of the factory oil filter housing and installed a 90-degree fitting for the oil supply line.

 0 Comment(s)

[olyeller40]

Thanks.

But on top of the oil filter housing there is 2 fittings the 1 on the inside I have to take off a hard coolant line is the 1 you can get out and put the 90° fitting in.

Thank you for your help.

 0 Comment(s)

[Jwaller]

I know I watched a YouTube video made by amsoil on the install.

I will try and find it.

I haven’t done this mod, but was looking at it.


2021 Ram 2500 Crew Can SB, Billet Silver Night Edition, Tuned by CCS/EFI Live, 5 position SOTF, 5” exhaust with Aeroturbine 5050xl resonator/muffler, S&B Intake, 295/60’s on stock 20’s.

 0 Comment(s)

[AK Bob]

Thanks.

But on top of the oil filter housing there is 2 fittings the 1 on the inside I have to take off a hard coolant line is the 1 you can get out and put the 90° fitting in.

Thank you for your help.

See this video 6:33 minutes in.

 0 Comment(s)

[olyeller40]

Thanks for helping me, but I have 2 1/4" plugs on the top of the filter housing.

1 of them I would have to remove a coolant hard line to put the the 90° fitting in.

The other one I will able to get to it easy and put the 90° fitting in and finish up but I don't know.

 0 Comment(s)